OSN3500 SSN1ADQ1 ATM Single BoardAppearance
Functions and Features
The SSN1ADQ1 single board supports ATM switching, ATM protection, and other functions and features.
The specific functions and features of the SSN1ADQ1 single board are shown in Table 1.
| Functions and Features | Description |
|---|---|
| Basic Functions | Access and process 4-channel STM-1 ATM services. |
| Optical interface type | Support standard optical interfaces of Ie-1, S-1.1, L-1.1, L-1.2 and Ve-1.2. The characteristics of the S-1.1, L-1.1, and L-1.2 optical interfaces comply with ITU-T G.957 recommendations, and the Ie-1 and Ve-1.2 optical interfaces are Huawei customized standards. |
| Connector Type | LC |
| Optical Module Type | SFP |
| E3 ATM Interface | 12-way E3, accessed via PD3/PL3/N1PL3A. |
| IMA Function | Not supported |
| Maximum uplink bandwidth |
8xVC-4 or 12xVC-3+4xVC-4 Description:
Only the 5th to 8th VC-4 can be bound to the VC-3 level of virtual cascade. You cannot bind both VC-3 channels and VC-4 channels within the same VC-4. VCTRUNK1 to VCTRUNK4 can only bind 1 to 4 VC-4 channels, VCTRUNK5 to VCTRUNK16 can bind 5 to 8 VC-4 channels and 1 to 12 VC-3 channels. |
| ATM switching capacity | Unidirectional 1.2Gbit/s, bidirectional 600Mbit/s. |
| Mapping method | VC-3, VC-4 or VC-4-Xv (X = 1 to 4) |
| Service type | CBR, rt-VBR, nrt-VBR and UBR |
| ATM Connections | 2048 entries |
| Statistical multiplexing | Support |
| Traffic types and QoS | IETF RFC2514, ATM forum TM4.0 |
| ATM multicast connections | Spatial multicast, logical multicast |
| ATM protection (ITU-T I.630) | Unidirectional/bidirectional 1+1 and 1:1, VP-Ring, VC-Ring |
| OAM functions (ITU-T I.610) | AIS, RDI, LB, CC |
| Maintenance Features | Supports inner loopback at the optical port level and ATM level, and outer loopback at the ATM level for maintenance and fault location. |
| Alarm and Performance | Provides rich alarms and performance events for maintenance and fault location. |
Chinese
English
