Protection requirements

OSN3500 SSN2EGR2 RPR single board appearance
The SSN2EGR2 single board supports Layer 2 switching, port aggregation, RPR, and other functions and features.
The specific functions and features of the SSN2EGR2 single board are shown in Table 1.
| Functions and Features | Description |
|---|---|
| Basic Functions | Access and process 2-channel GE services; support RPR feature processing. |
| Match with the outlet panel | Adopt panel direct outlet to access 2-channel GE Ethernet signals. |
| Interface specification |
|
| Service Frame Format |
|
| Maximum uplink bandwidth | 2.5Gbit/s, support slot bandwidth adaptive. |
| Mapping Method | VC-3, VC-3-Xv (X≤2), VC-4, VC-4-Xv (X≤8) Description: The VC-3 virtual cascade on the SDH side supports only 1 to 2 VC-3 virtual cascades, and the VC-3 time slots are fixed in the first two VC-3 time slots of the first VC-4 of the first STM-4 frame of each VCTRUNK. |
| Encapsulation Formats | GFP-F, LAPS |
| EVPL |
|
| EVPLAN |
|
| MPLS | Supports MartinioE |
| VLAN |
|
| Link Aggregation (LAG) | Supports link aggregation of 2 GE ports. |
| RPR |
|
| Rapid Spanning Tree (RSTP) | Supports broadcast message suppression function and Rapid Spanning Tree Protocol, which complies with IEEE 802.1w standard. |
| Multicast (IGMP Snooping) | Supports |
| QoS |
|
| LCAS | ITU-T G.7042, can realize dynamic increase, dynamic decrease and protection function of bandwidth. |
| Flow control function | Supports port-based IEEE 802.3x flow control. |
| 1588v2 | Does not support |
| Echo test frame | Supports the Echo function in RPR OAM to test the link pass-through state. |
| Port Mirroring | Not supported |
| Loopback Function | Supports internal loopback on Ethernet ports (PHY layer or MAC layer). |
| Protection Methods | Supports the following Ethernet network level protection methods:
|
| Ethernet Performance Monitoring | Supports port-level Ethernet performance monitoring. |
| Alarms and Performance | Provides rich alarms and performance events for easy device management and maintenance. |
| Soft Reset | Supports soft reset, which interrupts the service. |
| Hard Reset | Supports |
| Weighted Fair Algorithm | Supports |
| Topology auto-discovery | Support |
| Maximum number of nodes | 255 |
| Service Priority Levels | Five levels: A0, A1, B_CIR, B_EIR and C. |