Protection requirements

18529092692

  • SSN1PEG16.png
  • SSN1PEG16.png
OSN3500 SSN1PEG16 16-channel GE Packet Number Retriever Single Board
  • SSN1PEG16 single board is mainly used to solve the packet data transmission areas such as packet packet access, bandwidth management, packet switching and summarization. It supports 1000BASE-SX, 1000BASE-LX, 1000BASE-VX, 1000BASE-ZX optical interfaces.


Consultation hotline:
18529092692
Product Introduction

Products

Huawei SDH Transmission Equipment OSN3500 PEG16 Technical Parameters Introduction


OSN3500 SSN1PEG16 Functions and Features

The PEG16 single board supports the processing and forwarding of 16-channel GE services, and supports QoS functions such as traffic statistics, congestion control, and queue scheduling for packets.

The specific functions and features of the PEG16 single board are shown in Table 1.

Table 1 Functional characteristics of the PEG16 single board

Functions and FeaturesDescription
Basic FunctionsAccess and process 16-channel GE signals.
Interface type
  • Support 1000BASE-SX, 1000BASE-LX, 1000BASE-VX, 1000BASE-ZX optical interfaces, the optical interface adopts LC connector, supporting 0.5km, 10km, 40km, 80km distance transmission.

  • Support CWDM color optical interface, the optical interface adopts LC connector, support 40km transmission distance.

Match with cable outlet panelDirectly from the panel out of the line, can also be used with the interface board PETF8, each PEG16 single board supports access to a maximum of 2 interface board FE services.
Interface CharacteristicsPluggable Optical ModuleSupport SFP pluggable optical module
Single-fiber bi-directional optical moduleNot Supported
Working ModeSupport GE full duplex, self-negotiation working mode
Port Flow ControlSelf-negotiation: Not supported
Non-self-negotiation: Not supported
Port Status Query/SettingSupport
Interface type querySupport
Optical power threshold query/settingOnly support input optical power threshold setting
Unidirectional mode query/settingNot supported
Service SpecificationsProcessing capacityFull duplex 10Gbit/s
Service Bearer ModeMPLS: Support
QinQ: Support
Port: Support
PW SpecificationsNumber of PWs: 16K
Number of MS-PWs: 8K
Tunnel SpecificationsNumber of Unidirectional Tunnel: 4K (shared by Unidirectional and Bidirectional MPLS Tunnel)
Number of Bidirectional Tunnel: 2K (shared by unidirectional and bidirectional MPLS Tunnel)
Port MFLSupport 960Byte~9600Byte message length setting, after the setting takes effect, the maximum length of inbound and outbound messages are limited by MFL setting.
Service MTUSupports 64Byte~9600Byte message length setting.
Ethernet Service Specifications

E-Line: Support

Number of services that can be processed:

  • With N4GSCC: 4K

  • With N6GSCC: 8K

E-LAN: Support

Number of processable services: 1020.

Number of static MAC addresses for E-LAN services: 2K.

E-Aggr: Support 4 E-Aggr services, each supporting 127 leaf ports.
Ethernet Data Frame FormatSupport IEEE 802.3, Ethernet II, IEEE 802.1q/p frame format encapsulation.
Number of QinQ Link1K
Jumbo FrameSupports Jumbo frames up to 9600 Bytes.
Protection MethodTunnel APS

Supports 1+1 (single-ended/dual-ended) and 1:1 (dual-ended) Tunnel APS, which meets ITU-T Y.1720 and ITU-T G.8131 standards.

Number of APS: 1K.

PW APSDoes not support
LAG
  • Supports manual link aggregation and static link aggregation.

  • Supports load sharing and non-load sharing.

  • Meets IEEE 802.3ad and IEEE 802.1AX standards.

MC-LAGDoes not support
MSTPDoes not support
LPTPoint-to-Point LPT: Supported
Point-to-Multipoint LPT: Supported
SynchronizationSynchronized Ethernet ClockSupports 2-way synchronized Ethernet clock function (only the first 2 optical interfaces are supported).
1588v2Not supported
Maintenance FeaturesETH OAM

Ethernet service OAMa:

Supports CC, LB, LT and meets IEEE 802.1ag standard.

Support LM, 2DM, meet ITU-T Y.1731 standard.

Number of OAMs: 2K.

Ethernet port OAMa:

Support OAM auto-discovery, remote loopback, fault detection, link performance monitoring, meet IEEE 802.3ah standard.

Number of OAMs: 2K.

Distributed MPLS OAM/Centralized MPLS OAM

Description:

PEG16 only supports distributed MPLS OAM.

MPLS Tunnel OAMa:

Supports CV, FFD, BDI, FDI, Tunnel Ping, Tunnel Traceroute, and meets ITU-T Y.1711 standard.

Number of OAMs: 2K.

MPLS PW OAM: not supported
MPLS-TP OAMMPLS-TP Tunnel OAM: not supported
MPLS-TP PW OAM: not supported
Loopback CapabilityEthernet port PHY layer: inner/outer loopback supported
Ethernet port MAC layer: inner loopback supported
RMONSupport
Port mirroringNot supported
In-band DCNSupported
HQoS

Supports service WRED policy, WFQ policy, PW policy, QinQ policy, V-UNI Ingress policy, V-UNI Egress policy, port policy.

IGMP SnoopingProtocol EnablementSupport
Port aging timeSupport for
Fast LeaveSupport for
Unknown Multicast Message DiscardSupport for
Static Multicast Table EntriesSupport for
Tag LookupSupport for

OSN3500 SSN1PEG16 Single Board Alarm Indicators

  • Single-board hardware status indicator (STAT) - red and green dual-color indicators

  • Service activation indicator (ACT) - green light

  • Single-board software status indicator (PROG) - red, green dual-color indicator

  • Service warning indicator (SRV) - red, green, yellow color indicators

See the description of the single-board alarm indicator for the specific meaning of the indicator.

Interfaces

There are a total of 16 GE optical interfaces on the panel of the PEG16 single board, and the types and uses of the optical interfaces are shown in Table 1.

Table 1 PEG16 Single Board Interface Description

Panel InterfaceInterface TypePurpose
IN1 to IN16LC (pluggable)Receive GE signal
OUT1 to OUT16LC (pluggable)Transmit GE signal



Huawei SSN1PEG16 Purchase Price_Product Description_Hardware Description_Technical Parameters_Product Features-Huawei SDH Transmission Equipment Sales

Supply Optix OSN3500 SSN1PEG16 Quote_Agent Price_Sales Manufacturer_Product Supplier-Huawei SDH Transmission Equipment Sales

Online Ordering
Contact Us
Name:Mr Zhang
Phone:18529092692
Tel:18529092692
Email:info@opticaltrans.com
Address:Cuiguang 1st Distriuct Buiding 8th, Shenzhen, Guangdong Province
Contact
18529092692
Phone:18529092692
Email:info@opticaltrans.com
Address:Cuiguang 1st Distriuct Buiding 8th, Shenzhen, Guangdong Province
Follow Us
Otrans Technology is a high-tech enterprise deeply engaged in optical transmission and network communication equipment, specializing in...
Copyright © 2025 Otrans all right reserve XML