Optix OSN8800 TN11LOA 8-way Any service to OTU2 aggregation boards-Optical transimission network

Home >> Products >> Huawei SDH Optical Transmission Equipment >> Huawei OTN WDM >> OTN line/branch boards

OTN line/branch boards

Optix OSN8800 TN11LOA 8-way Any service to OTU2 aggregation boards

The Optix OSN8800 TN11LOA single board aggregates multiple customer-side services into one OTU2 optical signal and converts it to DWDM standard wavelengths in compliance with ITU-T G.694.1 recommendations, while enabling the inverse of the above conversion process

Consultation hotline：
18529092692

Product Introduction

Products

Huawei OTN OSN8800 TN11LOA Features and Functions

Table 1 LOA single board functions and features

The TN11LOA single board supports optical wavelength adjustable, OTN interface, ESC, and other functions and features.

The specific functions and features of the TN11LOA 8-way Any service to OTU2 aggregation board are shown in Table 1.

Functions and Features	Description
Basic Functions	The LOA supports the conversion of the following signals: 8 x (125 Mbit/s to 1.25 Gbit/s signals)1 x OTU2 4 x (1.49 Gbit/s to 2.67 Gbit/s signal)1 x OTU2 4 x OTU11 x OTU2 2 x 3G-SDI/3G-SDIRBR/FC400/FICON4G/Infiniband 2.5G1 x OTU2 1 x FC800/FICON8G/Infiniband 5G1 x OTU2 1 x FC1200/FICON10G/10GE LAN1 x OTU2e Supports mixing of signals with a rate lower than 4.25 Gbit/s. Mixing is not supported when accessing FC800/FICON8G/Infiniband 5G signals. The total rate of customer-side access service is less than 10Gbit/s.
Customer-side service types	FE: Ethernet service with a rate of 125 Mbit/s. GE: Ethernet service at a rate of 1.25 Gbit/s. Supports GE optical or electrical signals. 10GE LAN: Ethernet service at a rate of 10.31Gbit/s STM-1/OC-3: SDH/SONET service at a rate of 155.52Mbit/s STM-4/OC-12: SDH/SONET service at 622.08 Mbit/s STM-16/OC-48: SDH/SONET service at a rate of 2.5Gbit/s FC100: SAN service at a rate of 1.06 Gbit/s FC200: SAN service at 2.12 Gbit/s FC400: SAN service at 4.25Gbit/s FC800: SAN service at 8.5Gbit/s FC1200: SAN service at 10.51 Gbit/s FICON4G: SAN service at 4.25Gbit/s FICON8G: SAN service at 8.5 Gbit/s FICON10G: SAN services at 10.51 Gbit/s Infiniband 2.5G: SAN services at 2.5Gbit/s Infiniband 5G: SAN services at 5Gbit/s ESCON: SAN service at 200 Mbit/s FICON: SAN service at 1.06Gbit/s FICON Express: SAN service at 2.12 Gbit/s FDDI: SAN service at a rate of 125Mbit/s HD-SDI: High-definition digital TV service at 1.49Gbit/s HD-SDIRBR: High-definition digital TV service at 1.49/1.001Gbit/s OTU1: OTN service at 2.67 Gbit/s SDI: digital TV service at 270Mbit/s DVB-ASI: digital TV service at 270Mbit/s 3G-SDI: digital TV service at 2.97Gbit/s 3G-SDIRBR: High-definition digital TV service at 2.97/1.001Gbit/s Description: The LOA supports GE optical signals and GE electrical signals. When accessing GE electrical signals, it is recommended to configure at most 2 electrical modules for the convenience of fiber routing. LOA board supports access to SDI, HD-SDI, HD-SDIRBR, 3G-SDI, 3G-SDIRBR, DVB-ASI telecommunication signals, and when accessing, it is necessary to use digital video photoelectric converter box, and its optical module needs to satisfy the requirements of the single board's optical module index, and the video converter box is a third-party device, which is purchased by itself. FICON4G and FC400 have the same processing. When transmitting FICON4G service, it can be configured as FC400 on the network management.
OTN Function	WDM side provides OTU2/OTU2e interface. Adopts ITU-T G.709 recommended frame format and overhead processing. ODU0 layer: support PM function, non-intervention monitoring function of PM. ODUk (k=1, 2) layer: support PM and TCM functions, non-invasive monitoring function for PM and TCM. ODUflex layer: support PM function, non-invasive monitoring function of PM. OTUk (k=1, 2) layer: supports SM function.
WDM Specifications	Supports DWDM specifications of ITU-T G.694.1.
Wavelength Tunable Function	Supports wavelength tunable optical modules. If the wavelength tunable optical module is configured, it can realize that the WDM side optical signal can be tunable in the 80-wave range in the 50 GHz interval of C-band.
ESC Function	Support
PRBS Function	Customer-side and WDM-side support. Description: The PRBS function is supported on the customer side only when accessing STM-1/STM-4/STM-16/OC-3/OC-12/OC-48/OTU1 services.
LPT Function	The LPT function is supported only when the service type of the customer side is GE/FE/10GE LAN.
FEC Coding	FEC coding is supported on the customer side when accessing OTU1 services, in accordance with ITU-T G.709 recommendations. The WDM side supports FEC coding in accordance with the recommendations of ITU-T G.709. The WDM side supports AFEC-2 encoding, in accordance with the recommendations of ITU-T G.975.1. Description: Veneers with different error correction coding cannot be docked.
Performance Surveillance and Alarm Monitoring	Provides BIP8 byte monitoring (burst mode) to locate line faults. Provides B1 byte monitoring to locate line faults. Supports OTN performance monitoring and alarm monitoring. Provides the following monitoring functions: laser bias current monitoring, laser operating temperature monitoring, optical power monitoring, etc. Provides Ethernet RMON monitoring function.
Relay board	WDM side signals of LOA single board can be relayed through other TN12ND2/TN52ND2/TN53ND2/TN57ND2/TN55NO2/TN55NH2/TN53NQ2/TN54NQ2/TN57NQ2 single boards.
ALS Function	Customer side support when accessing non-OTN services.
Test frame function	The test frame function is supported only when the customer side service type is GE and FE.
Delay Measurement	Supports
Optical layer ASON	Support
Electrical Layer ASON	Not supported
Protection Mode	Supports on-board 1+1 protection (realized with QCP or OLP or DCP single board). Supports customer-side 1+1 protection. Support optical wavelength sharing protection.
Ethernet service mapping mode	Supports GE(GFP-T) and GE(TTT-GMP) encapsulation for GE services. Support 10GE LAN service Bit transparent mapping (11.1G).
Ethernet Port Operating Modes	FE: 100M full duplex GE(TTT-GMP): 1000M full duplex, self-negotiation mode
IEEE 1588v2	Not supported
Physical Layer Clock	When the client side accesses GE service and the port service mapping path is "TTT-GMP", synchronous Ethernet passthrough is supported, and synchronous Ethernet processing is not supported. When 10GE LAN service is accessed on the customer side and the port service mapping path is "Bit Transparent Mapping (11.1G)", synchronous Ethernet passthrough is supported and synchronous Ethernet processing is not supported.
Loopback	Channel loopback	Internal Loopback	Supported Description: Intra-channel loopback is not supported when accessing FC800/FICON8G/Infiniband 5G services and in ODUflex non-aggregation mode (Any->ODUflex->ODU2->OTU2).
	Channel loopback	Outside Loopback
	Wavelength Division Side	Inner Loopback	Not supported
	Wavelength Division Side	Outer Loopback	Supported Description: Supported only when accessing FC800/FICON8G/FC1200/FICON10G/10GE LAN services and in ODU2 non-aggregation mode (Any->ODU2->OTU2).
	Customer Side	Inner Loopback	Supported Description: Customer-side inner loopback is not supported when accessing FC800/FICON8G/FC1200/FICON10G/10GE LAN services.
	Customer Side	Outer Loopback
Supported protocols or standards	Protocol or standard for pass-through (no performance monitoring)	IEEE 802.3u IEEE 802.3z ITU-T G.707 ITU-T G.782 ITU-T G.783 GR-253-CORE Synchronous Optical Network (SONET) Transport Systems: Common Generic NCITS FIBRE CHANNEL PHYSICAL INTERFACES (FC-PI) NCITS FIBRE CHANNEL LINK SERVICES (FC-LS) NCITS FIBRE CHANNEL FRAMING AND SIGNALING-2 (FC-FS-2) NCITS FIBRE CHANNEL BACKBONE-3 (FC-BB-3) NCITS FIBRE CHANNEL SWITCH FABRIC-3 (FC-SW-3) NCITS FIBRE CHANNEL - PHYSICAL AND SIGNALING INTERFACE (FC-PH) NCITS FIBRE CHANNEL SINGLE-BYTE COMMAND CODE SETS-2 MAPPING PROTOCOL (FC-SB-2) SMPTE 292M Bit-Serial Digital Interface for High-Definition Television Systems ETSI TR 101 891 Professional Interfaces:Guidelines for the implementation and usage of the DVB Asynchronous Serial Interface (ASI) SMPTE 259M 10-Bit 4:2:2 Component and 4fsc Composite Digital Signals - Serial Digital Interface NCITS SBCON Single-Byte Command Code Sets CONnection architecture (SBCON) ANSI X3.139 Information Systems - Fiber Distributed Data Interface (FDDI) - Token Ring Media Access Control (MAC) ANSI X3.148 Information Systems - Fiber Distributed Data Interface (FDDI) - Token Ring Physical Layer Protocol (PHY) ANSI X3.166 Information Systems - Fiber Distributed Data Interface (FDDI) Physical Layer Medium Dependent (PDM)
Supported protocols or standards	Protocol or standard for processing (with performance monitoring)	ITU-T G.805 ITU-T G.806 ITU-T G.709 ITU-T G.872 ITU-T G.7710 ITU-T G.798 ITU-T G.874 ITU-T M.3100 ITU-T G.874.1 ITU-T G.875 ITU-T G.808.1 ITU-T G.841 ITU-T G.8201 ITU-T G.694.1