Optix OSN8800 TN54TSXL 40Gbit/s Tributary Service Processing Board-Optical transimission network

Home >> Products >> Huawei SDH Optical Transmission Equipment >> Huawei OTN WDM >> OTN line/branch boards

OTN line/branch boards

Optix OSN8800 TN54TSXL 40Gbit/s Tributary Service Processing Board

The Optix OSN8800 TN54TSXL single board belongs to the tributary class of single boards, and the TN11TSXL realizes the interconversion between one STM-256/OC-768 service optical signal and four ODU2 electrical signals.

Consultation hotline：
18529092692

Product Introduction

Products

Introduction of OSN8800 TN54SXL Functions and Features

Huawei WDM OSN8800 TN54TSXL single board belongs to the tributary class of single boards. TN11TSXL realizes the interconversion between 1-channel STM-256/OC-768 service optical signals and 4-channel ODU2 telecommunication signals; TN53TSXL realizes the interconversion between 1-channel STM-256/OC-768/OTU3 service optical signals and 1-channel ODU3; TN54TSXL realizes the interconversion between 1 channel 40GE service optical signal and 1 channel ODU3.

The application of OSN8800 TN54TSXL (40 Gbit/s tributary service processing board) single board in WDM system is shown in Figure 1, Figure 2 and Figure 3.

Figure 1 Application of TN11TSXL single board in WDM system

Figure 2 TN53TSXL single board in WDM system

Description:

In this application scenario, the "Line Rate" parameter of TN54NS3/TN55NS3/TN56NS3 single board must be set to "Standard Mode".

Figure 3 Application of TN54TSXL single board in WDM system

Description:

In this application scenario, the "Line Rate" parameter of TN54NS3/TN55NS3/TN56NS3 single board must be set to "Standard Mode".

Functions and Features

TSXL boards support functions and features such as layer crossing.

TSXL single board functions and features, as shown in Table 1.

Table 1 TSXL Single Board Functions and Features

Functions and Features	Description
Basic Functions	Realizes the interconversion of the following signals: TN11TSXL: 1x(STM-256/OC-768) 4xODU2 Realizes transparent transmission of 40Gbit/s services in a 10Gbit/s network. TN53TSXL: 1x(STM-256/OC-768/OTU3) 1xODU3 TN54TSXL: 1x40GE1xODU3
Customer side service type	STM-256/OC-768: SDH/SONET service at 39.81 Gbit/s OTU3: OTN service at 43.02Gbit/s 40GE: Ethernet service at 41.25 Gbit/s
Cross-capability	TN11TSXL: Supports 4-channel ODU2 signals to realize cross-scheduling of services with the cross board through the backplane bus. TN53TSXL/TN54TSXL: Supports 1 ODU3 signal to realize cross-scheduling of services with the cross board through the backplane bus.
OTN Function	Adopts ITU-T G.709 recommended frame format and overhead processing. Supports PM function of ODU2 layer on the backplane side. Supports PM and TCM functions at the ODU3 layer on the backplane side.
Error correction coding	Supports FEC coding when accessing OTU3 services on the client side, complying with ITU-T G.709 recommendations.
PRBS test function	TN11TSXL/TN54TSXL: Not supported. TN53TSXL: Supported on the client side.
LPT Function	Not supported
Alarm and Performance Monitoring	Provides BIP8 byte monitoring (Poisson mode or burst mode), which can locate line faults. Provides B1 byte monitoring, which can locate line faults. Supports OTN performance monitoring and alarm monitoring. Provides the following monitoring functions: laser bias current monitoring, laser operating temperature monitoring, optical power monitoring, etc. Provides Ethernet RMON monitoring function. Description: Only the TN54TSXL supports the Ethernet RMON (Remote Monitor) monitoring function. Only the TN11TSXL/TN53TSXL supports Poisson mode. Only TN11TSXL/TN53TSXL supports laser temperature detection. Only TN11TSXL/TN53TSXL supports B1 byte monitoring.
ALS Function	Supported on the client side.
Test frame function	Supported by TN54TSXL
Delay Measurement	Not supported
IEEE 1588v2	Not supported
Physical Layer Clocking	The TN54TSXL supports synchronous Ethernet passthrough and does not support synchronous Ethernet processing.
Electrical Layer ASON	Supported by TN53TSXL/TN54TSXL
Protection Mode	Supports client-side 1+1 protection. Supports ODUk SNCP protection. Supports branch SNCP protection. Description: The TN54TSXL single board does not support branch SNCP protection. Description: Branch SNCP protection is supported only when the client side is accessing OTN service and SDH/SONET service.
Loopback	Wavelength Division Side		-
	Customer Side	Internal Loopback	Supported
	Customer Side	Outer Loopback	Supported
Supported Protocols or Standards	Protocols or standards for pass-through (no performance monitoring)	ITU-T G.707 ITU-T G.782 ITU-T G.783 GR-253-CORE Synchronous Optical Network (SONET) Transport Systems: Common Generic
Supported Protocols or Standards	Protocols or standards handled (with performance monitoring)	ITU-T G.805 ITU-T G.806 ITU-T G.709 ITU-T G.872 ITU-T G.7710 ITU-T G.798 ITU-T G.874 ITU-T M.3100 ITU-T G.874.1 ITU-T G.875 ITU-T G.808.1 ITU-T G.841 ITU-T G.8201 ITU-T G.873.1 ITU-T G.694.1 ITU-T G.8261 ITU-T G.8262