18529092692

Home >> News
News
OSN1800V Optical Network Transmission Equipment TNF5HUNQ2 Service Mapping Failure
| 2025-11-21|Back


OSN1800V Optical Network Transport Equipment TNF5HUNQ2 single board supports mixed transmission of OTN, SDH and packet services. It supports functions and features such as Layer 2 switching, OTN interface, SDH overhead processing, and so on. The single board supports mixed transmission of ODU0, ODU1, ODUflex, ODU2, ODU2e, STM-16, STM-64 and packet service signals with a total bandwidth of not more than 40Gbit/s. Supports wavelength tunable optical modules. It can realize the WDM side optical signals adjustable in 80-wave range at 50GHz interval in C-band.

Problem Description

Problem Summary] [TL1] Trouble: OSN 1800V configuration packet service prompt: out of LICENSE authorization range, error code: 41861, need to update the license with packet service function.

Problem Details】018633095006 OSN 1800V configure packet service prompt: out of LICENSE authorization range, error code: 41861.

A new transmission project, the device type is OSN 1800V, belongs to the MS_OTN equipment, the equipment is configured with a hybrid line card TNF5HUNQ2, in the network management of the "service mapping settings" operation, prompted the operation failed, the error code is: 1107329312, for the operation of the object of the operation given operation The error code is 1107329312, and the operation prompt for the target operation is: exceeding the scope of License authorization, error code 41861, as shown in the figure below:

Network element version: V100R003C05SPC200 (5.67.3.63)

TNF5HUNQ2 single board version: 1.03

Webmaster version: U2000V100R009C00SPC301 .

Processing

1, the reason for the failure of the specific operation prompts, should be License authorization issues, it is possible that in the product configuration offer stage is not configured "OSN 1800 Platform unified line card Packet encapsulation capabilities (per single board)" License, after confirming with the product manager, this feature control items After confirming with the product manager, this feature control item has been configured, as shown in the table below:

2, since this function control item has been configured in the License, then it should be that there is no License configuration for the network element, check the network element License configuration on the network manager to confirm that the network element is not configured with License. query the entry point is: Network Element Manager > Configuration > License Authorization Management for Network Element, and check the "License Status/Configuration" on the right side of the window. "License Status/Quantity" is 0/0 before configuration and 2/2 after configuration.

Root Cause

There is no License configuration for the network element.

Solution

Solution Summary

【Resolution Details

1. Configure the license for the network element in the network management. The configuration portal is: Configuration > Network Element Batch Configuration > Network Element License Authorization", enter the "License Selection" interface, and check "OSN 1800 Platform Unified Line Card" in the interface. Check "OSN 1800 Platform Unified Line Card Packet Encapsulation Capability (per single board) (remaining 6)" on the interface and output the number of virtual ports "6", then click Apply.

2、After the application, query the License configuration of the network element, the "License Status/Quantity" is 2/2, which is normal, and the "Service Mapping Settings" can be operated successfully.

Suggestions and Summary

If you want to use the TP-Assist function, the grouping function of the unified line veneer and the OSN 8800T32 standard subrack speed function, you need to be reflected in the product License configuration offer, and in the implementation of the network management needs to be carried out on the network element in the corresponding License configuration.


The relevant technical information in this chapter and the SDH equipment troubleshooting process are collected and organized by Shenzhen Optical Transmission Network Technology Co. (www.opticaltrans.com), please retain! Our company specializes in Huawei SDH optical transmission equipment, SDH transmission equipment sales.


Sell OSN1800V transmission equipment_Product Quotation_Sales Manufacturer_Product Characteristics_Product Description_Huawei SDH transmission equipment sales
Supply OSN1800V transmission equipment_Troubleshooting_Installation and testing_Technical indicators_Technical parameters_Huawei SDH transmission equipment sales

Contact Us
Name:Mr Zhang
Phone:18529092692
Tel:18529092692
Email:info@opticaltrans.com
Address:Cuiguang 1st Distriuct Buiding 8th, Shenzhen, Guangdong Province
Contact
18529092692
Phone:18529092692
Email:info@opticaltrans.com
Address:Cuiguang 1st Distriuct Buiding 8th, Shenzhen, Guangdong Province
Follow Us
Otrans Technology is a high-tech enterprise deeply engaged in optical transmission and network communication equipment, specializing in...
Copyright © 2025 Otrans all right reserve XML 网站模板