Description of the problem

The meaning and handling of the ALM_GFP_dLFDF alarm on Huawei SDH Transport OSN1500 devices.

Solution

OSN1500B ALM_GFP_dLFD is a GFP (Generic Framing Procedure) frame out-of-step alarm. This alarm is generated when the GFP delimited state machine jumps out of the SYNC state of the delimited processing, and the alarm is canceled when it returns to the SYNC state.

Processing method:

1. check whether the number of uplink time slots (number of downlink time slots) of the VCTRUNK binding configured at this end is consistent with the number of downlink time slots (number of uplink time slots) configured at the opposite end.

2, check whether the fiber optic connector is loose, not clean, whether there is a fiber optic cable failure, poor contact of the components in the optical path transmission, and so on.

3. For the Ethernet single board with interface board, replace the interface board first. For the single board without interface board, directly replace the single board that reports alarms.

The related technical information in this chapter and the troubleshooting process of SDH equipment are collected and organized by Shenzhen Optical Transmission Network Technology Company Limited ( www.opticaltrans.com), please retain! Our company specializes in the sale of Huawei SDH optical transmission equipment,SDH transmission equipment.