18529092692

Home >> News
News
Huawei OSN3500_SDH Transmission Equipment Product Specifications
| 2025-11-21|Back

Product Features

OSN3500 intelligent optical transmission equipment is a new-generation intelligent optical transmission equipment developed by Huawei. It adopts a unified switching architecture, which can be used as packet equipment and TDM equipment based on MPLS/MPLS-TP technology; in conjunction with other Huawei equipment, the OSN3500 supports different networking applications: pure packet mode applications, hybrid networking applications (stacked packet mode and TDM mode networking), and pure TDM mode applications. OSN3500 supports different networking applications: pure packet mode application, hybrid networking application (stacked packet mode and TDM mode), and pure TDM mode application, realizing the optimal processing of data services and traditional SDH services.OSN3500 realizes the efficient transmission of voice and data services on the same platform.

Product Specification

Introduces the product (hereinafter referred to as OSN3500 equipment) appearance and system specifications.

Table 1 Product appearance and specifications

Indicator

Description

Product Appearance


External Dimension (mm)

497(W)x295(D)x722(H)

Number of slots for business boards

15 processing board slots, 16 interface board slots

Device capacity

Packet

160Gbit/s packet capacity

TDM 200Gbit/s high-order capacity, 20Gbit/s low-order capacity

Supported Service Types

SDH, PDH, ATM, CES, Ethernet, PCM, SAN, video and others
Hybrid line veneer

HSNS3: Single optical port 40G

Network Topology

Point-to-point, chain, star, ring, ring with chain, ring intersection, ring tangent

Backup and Protection

Network level protection (packetized) Tunnel 1:1/1+1 APS, PW 1:1/1+1 APS, Packet Linear Multiplexing Segment Protection, LPT, MSTP, MRPS
Network-level protection (TDM)
  • SDH protection: subnet connection protection, linear multiplexing segment protection, ring multiplexing segment protection, E1 SNCP, DNI protection, shared fiber virtual path protection, multiplexing segment shared optical path protection
  • EoS protection: LCAS, LPT, STP/RSTP, MSTP, ERPS, RPR, VP-Ring/VC-Ring protection

Device-level protection

  • Packetization: LAG, MC-LAG, ETH-TRUNK
  • TDM: TPS, BPS, PPS, LAG, DLAG, ATM single board 1+1 protection, wavelength conversion unit 1+1 protection
  • Cross and clock unit 1+1 hot backup
  • System control and communication unit 1+1 hot backup
  • Power input unit 1+1 hot backup
  • Single board +3.3V power supply 1:N protection
  • Smart Fan
  • Single board protection method for abnormal conditions
Maintenance MPLS OAM Support CV, FFD, BDI, FDI, Ping, Traceroute
MPLS-TP OAM

Supports CC, RDI, AIS, LB, LT, LM (single-ended LM only), DM, TST, LCK, CSF (only CSF for PW)

ETH OAM (Packet)
  • Ethernet service OAM: supports CC, LB, LT, LM (single-ended LM only), DM (Two-way DM only)
  • Ethernet port OAM: supports OAM auto-discovery, link performance monitoring, far-end loopback, fault detection, self-loop detection
ETH OAM (TDM)
  • Ethernet service OAM: supports CC, LB, LT, OAM_Ping
  • Ethernet port OAM: supports OAM auto-discovery, link performance monitoring, far-end loopback, fault detection, self-loop detection
Synchronization Grouping
  • Physical layer clock
  • Synchronous Ethernet
  • IEEE 1588v2
  • CES ACR
TDM Physical Layer Clocking
DCN Out-of-band DCN Supports HWECC, IP over DCC, OSI over DCC
In-band DCN Supports HWECC, IP
TP-Assist
  • Service Configuration: Supports end-to-end service configuration, alarm deployment with service.
  • Service Tuning: Support one-click service pass-through test, one-click service performance test, and meter-free automatic test.
  • Routine Operation and Maintenance: Support performance statistics and monitoring, private line/private network service path visualization.
  • Fault location: supports intelligent fault location, IP Ping initiation and response, and service loopback detection.
Standard Operating Voltage
  • If the standard voltage of the input power supply is -48V, the power supply voltage is between -38.4V and -57.6V.
  • If the standard voltage of the input power supply is -60V, the power supply voltage is between -48V and -72V.
Installation method ETSI cabinet
Equipment Operating Environment Subrack temperature
  • Long-term: 0°C to 45°C
  • Short-term:-5℃~55℃
Subrack relative humidity
  • Long term:5%~85%
  • Short-term:5%~95%
Reliability index System availability 0.999996370
MTTR (Mean Time to Repair) 1 hour
MTBF (Mean Time Between Failure of System) 31.45 years

The related technical information and SDH equipment troubleshooting procedures in this chapter are provided by Shenzhen Optical Transmission Network Technology Co., Ltd (www.opticaltrans.com), please retain the reproduction! Huawei SDH Optical Transmission Equipment,SDH Transmission Equipment Sales


Sell Huawei OSN3500_Product Quotation_Sales Manufacturer_Product Characteristics_Product Description_Huawei SDH Transmission Equipment Sales
Supply Huawei OSN3500_Troubleshooting_Installation and testing_Technical indicators_Technical parameters_Huawei SDH transmission equipment sales

Contact Us
Name:Mr Zhang
Phone:18529092692
Tel:18529092692
Email:info@opticaltrans.com
Address:Cuiguang 1st Distriuct Buiding 8th, Shenzhen, Guangdong Province
Contact
18529092692
Phone:18529092692
Email:info@opticaltrans.com
Address:Cuiguang 1st Distriuct Buiding 8th, Shenzhen, Guangdong Province
Follow Us
Otrans Technology is a high-tech enterprise deeply engaged in optical transmission and network communication equipment, specializing in...
Copyright © 2025 Otrans all right reserve XML 网站模板