18529092692

Home >> News
News
Huawei TMB1SL16S_OSN1800V TMB1SL16S Single Board Price
| 2025-11-21|Back

OSN1800V TMB1SL16S 1-channel STM-16 service processing board. The single board supports SNCTP protection when used with TNZ5UXCMS/TNZ5XCS masters. TMB1SL16S supports color optical interfaces: CWDM (STM-16, 40km), CWDM (STM-16, 80km), DWDM (STM-16, 120km) Gray optical interfaces: S-16.1, L-16.1, L-16.2. 16.2, TMB1SL16S single board consists of optoelectronic conversion module, overhead processing unit, logic control unit and clock unit.TMB1SL16S realizes the receiving and transmitting of 1 channel of STM-16 optical signals, completes the optoelectronic conversion of STM-16 signals, the extracting and inserting processing of overhead bytes, and reports alarms generated on the line. Supports VC-12/VC-3/VC-4 services and VC-4-4c/VC-4-16c cascade services. Supports 1 SDH line clock. Supports hot-swapping. Supports query function of single board manufacturing information. Supports online loading function of FPGA. Support soft reset and hard reset, soft reset does not affect the service. Provide rich alarms and performance events for easy equipment management and maintenance.

OSN1800V TMB1SL16S Single Board Appearance


OSN1800V TMB1SL16S Single Board Matching Table

Single Board

Adapted Products-Master Controls-Starting Version of Master Controls Supported Single Boards

TMB1SL16S

1800 IIEnhanced-TNZ2UXCL-V100R019C10SPC700

1800V-TNZ5UXCMS/TNZ5XCS-V100R019C10SPC700

1800 IIPro-TMK2UXCL-V100R019C10SPC700

1800 VPro-TMK5SXCH-V100R019C10SPC700

OSN1800V TMB1SL16S Single Board Indicator Description

Indicator silkscreen

Indicator Name

Indicator Color

Indicator Status

Status Description

STAT

Single Board Hardware Status Light

Green

Bright

Normal operation

Green

Blinking

Single board in maintenance status

Red color

Bright

Hardware failure on single board

Yellow color

Bright

Secondary alarm

-Out

Out

  • Board not powered on or created
  • No power input to the board

SRV

Service Status Indicator

Green

Always on

System/service is working normally

Red

Bright

System/service has emergency or major alarm

Yellow

Always on

System/service has secondary or remote alarms

-Amber

Extinguished

System has no power input or no service configured

LOSn

Alarm indicator

Red

Always on

R_LOS alarm is reported on the optical interface on the single board

Red

Blinking: 3 times every 1 second

The optical interface on the single board receives too much light.

Red color

Blinking: 1 time every 1 second

The optical interface on the single board receives light too weakly.

Red color

Blinking: 1 time every 3 seconds

The optical interface on the single board receives MS_RDI alarm on the optical port

-Red

Out

  • The single board is not online
  • Optical module is not in position
  • No R_LOS alarm for the optical interface on the single board
OSN1800V TMB1SL16S Single Board Interface Description

Connector

Connector Type

Network Management Interface Serial Number

Purpose of Connector

Corresponding Cable

Port1

LC

LC1

Sends/receives service signals from the client device.

LC/PC type fiber optic connector

OSN1800V TMB1SL16S Functions and Features

Functions and Features

Description

Basic Functions

Receive and transmit 1 channel STM-16 optical signal.

Interface Specifications

  • Gray light interface: S-16.1, L-16.1, L-16.2
  • Color optical interface: CWDM (STM-16, 40km), CWDM (STM-16, 80km), DWDM (STM-16, 120km)

Service Processing

Supports VC-12/VC-3/VC-4 services and VC-4-4c/VC-4-16c cascade services.

ALS

Supported (ITU-T G.664 compliant)

Out-of-band DCN

Support

Overhead Handling

  • Handling of segment overhead for STM-16 signals.
  • Higher order channel overhead handling.
  • Provides transparent DCC (Data Communication Channel) and official byte channel.
  • Supports setting and querying of J0/J1/C2 bytes.

Pointer Handling

Supports AU pointer processing.

Alarm and Performance

Provides rich alarms and performance events for easy device management and maintenance.

Protection Mode

  • Support two-fiber bidirectional multiplexing segment ring protection.
  • Supports linear multiplexing segment protection.
  • Support SNCP protection.
  • Supports SNCTP protection when used with TNZ5UXCMS/TNZ5XCS master control.

Line Clock Source

Supports 1 SDH line clock.

Maintenance Features

  • Supports inner loopback and outer loopback at the optical port level.
  • Supports inner loopback and outer loopback for VC-4 channels and outer loopback for VC-3/VC-12 channels for quick fault location.
  • Supports setting transmit/receive overhead bytes.
  • Supports line optical port SSM (Synchronization Status Message) enable control.
  • Supports line Kbyte pass-through test.
  • Support BER overrun/degradation threshold setting.
  • Supports soft reset and hard reset, soft reset does not affect service.
  • Supports query function of single board manufacturing information.
  • Support the online loading function of FPGA.
  • Support hot-plugging.

SDH ASON

Supported when used with TNZ5UXCMS/TNZ5XCS master control.

2M ASON↵

Supported when used with TNZ5UXCMS/TNZ5XCS master.

OSN1800V TMB1SL16S Single Board Pluggable Slot

Product Name: OSN1800V

Pluggable Slots

1800 II Enhanced Box

Slot 1 to Slot 6

1800 V Box

Slot 1 to Slot 14

1800 II Pro Box

Slot 1 to Slot 6

1800 V Pro Box

Slot 1 to Slot 14

The mechanical indicators of OSN1800V TMB1SL16S single board are as follows: Dimensions (W×H×D, unit: mm) 193.8×19.8×205.9 Weight: 0.65kg Typical power consumption of the single board is 12W, and the maximum power consumption of the single board is 13W. The maximum power consumption refers to the value of the equipment measured under the highest ambient temperature during normal operation.

This chapter of related technical information and SDH equipment troubleshooting procedures collected and organized by Shenzhen Optical Transmission Network Technology Company Limited (www.opticaltrans.com), reproduced please retain! Our company specializes in Huawei SDH optical transmission equipment, SDH transmission equipment sales.


Sales OSN1800V TMB1SL16S_Product Quotation_Sales Manufacturer_Product Characteristics_Product Description_Huawei SDH transmission equipment sales
OSN1800V TMB1SL16S_Troubleshooting_Installation_Tuning_Technical Specification_Technical Parameters_Huawei SDH Transmission Equipment Sales

Contact Us
Name:Mr Zhang
Phone:18529092692
Tel:18529092692
Email:info@opticaltrans.com
Address:Cuiguang 1st Distriuct Buiding 8th, Shenzhen, Guangdong Province
Contact
18529092692
Phone:18529092692
Email:info@opticaltrans.com
Address:Cuiguang 1st Distriuct Buiding 8th, Shenzhen, Guangdong Province
Follow Us
Otrans Technology is a high-tech enterprise deeply engaged in optical transmission and network communication equipment, specializing in...
Copyright © 2025 Otrans all right reserve XML 网站模板