Chinese
English
This content summarizes the common interface metrics for all SDH veneers in the OptiX OSN family of products.
The commonly used optical interface metrics for SDH class single boards are shown in Table 1.
| Name of single board | Optical module | Maximum transmission distance (km) | Fiber type | ||||
|---|---|---|---|---|---|---|---|
| Support optical interface type | Average Transmit Power | Receiving sensitivity (dBm) | Minimum overload point (dBm) | ||||
| Minimum (dBm) | Maximum (dBm) | ||||||
| SL1, SL1A | I-1 | -15 | -8 | -23 | I-1-15-8-23. | 2 | Singlemode LC |
| S-1.1 | S-1.1 -15 | -8 | -28. | -Eight. | 15 | Single Mode LC | |
| L-1.1 | L-1.1 | 0 | -34. | -10. | 40 | Single Mode LC | |
| L-1.2 | L-1.2 | 0 | -34 | -10. | 80 | Single Mode LC | |
| Ve-1.2 | -3 | 0 | 3.0 -34 | 0-34 -10 | 100 | Singlemode LC | |
| SLQ1, SLQ1A | I-1 | -15 | -8 | I-1 -15 -8 | I-1-15-8-23. | 2 | Singlemode LC |
| S-1.1 | S-1.1 -15 | -8 | -28. | -Eight. | 15 | Single Mode LC | |
| L-1.1 | L-1.1 | 0 | -34. | -10. | 40 | Single Mode LC | |
| L-1.2 | L-1.2 | 0 | -34 | -10. | 80 | Single Mode LC | |
| Ve-1.2 | -3 | 0 | 3.0 -34 | 0-34 -10 | 100 | Single Mode LC | |
| Ie-1 | Ie-1 -19 | -14 | Ie-1 -19 -14 -30 | -Fourteen. | 2 | Multimode LC | |
| SLT1 | S-1.1 | S-1-1 | S-1.1 -15 -8 | -28. | -Eight. | 15 | Single Mode LC |
| L-1.1 | L-1.1 | 0 | -34. | -10. | 40 | Single Mode LC | |
| L-1.2 | L-1.2 | 0 | -34 | -10. | 80 | Singlemode LC | |
| sl4, sl4a, sld4, sld4a, slq4, slq4a | I-4 | -15 | I-4 -15 -8 | I-4 -15 -8 | I-4 -15 -8 -23 | 2 | Singlemode LC |
| S-4.1 | S-4.1 -15 | -8 | -28. | -Eight. | 15 | Singlemode LC | |
| L-4.1 | L-4.1 | 2 | -28. | -Eight. | 40 | Singlemode LC | |
| L-4.2 | L-4.2 | 2 | -28. | -Eight. | 80 | Single Mode LC | |
| Ve-4.2 | -3 | 2 | -34 | -13. | 100 | Singlemode LC | |
| SL16 | L-16.2 | L-16.2 | 2-2-3 | -28 | 3-28 | 80 | Single Mode LC |
| L-16.2Je | 5 | 7 | -28 | -9 | 100 | Single Mode LC | |
| V-16.2 Je (BA) |
Without BA: -2 Plus BA: 13 |
Without BA:3 Add BA:15 |
-28 | -Nine. | 140 | Single Mode LC | |
| U-16.2Je (BA+PA) |
Without BA and PA:-2 With BA:15 |
Without BA and PA:3 Plus BA:18 |
Without PA and BA:-28 Add PA:-32 |
No PA and BA:-9 Add PA:-10 |
170 | Single Mode LC | |
| SL16A | I-16 | -10 | I-16 -10 -3 | I-16 -10-3 | -Three. | 2 | Singlemode LC |
| S-16.1 | S-16.1 | 0 | -18 | 0 -18 | 15 | Single Mode LC | |
| L-16.1 | L-16.1 | 3 | -27 | -9. | 40 | Single Mode LC | |
| L-16.2 | L-16.2 | 3 | -28 | 3-28. -9. | 80 | Single Mode LC | |
| SLQ41 | I-1 | I-1 | I-1-15 -8 | Twenty-three. | -Eight. | 2 | Singlemode LC |
| S-1.1 | S-1.1 -15 | -8 | -28. | -Eight. | 15 | Single Mode LC | |
| L-1.1 | L-1.1 | 0 | -34. | -10. | 40 | Single Mode LC | |
| L-1.2 | L-1.2 | 0 | -34 | -10. | 80 | Single Mode LC | |
| Ve-1.2 | -3 | 0 | 3.0 -34 | 0-34 -10 | 100 | Singlemode LC | |
| I-4 | I-4 -15 | I-4-15. -8. | Twenty-three. | -Eight. | 2 | Singlemode LC | |
| S-4.1 | S-4.1 -15 | -8 | -28. | -Eight. | 15 | Singlemode LC | |
| L-4.1 | L-4.1 | 2 | -28. | -Eight. | 40 | Singlemode LC | |
| L-4.2 | L-4.2 | 2 | -28. | -Eight. | 80 | Single Mode LC | |
| Ve-4.2 | -3 | 2 | -34 | -13. | 100 | Singlemode LC | |
Common optical interface metrics for SDH class single boards (FECs) are shown in Table 2.
| Name of single board | Optical module | Maximum transmission distance (km) | Fiber type | ||||
|---|---|---|---|---|---|---|---|
| Supported optical interface type | Average Transmit Power | Receiving sensitivity (dBm) | Minimum overload point (dBm) | ||||
| Minimum (dBm) | Maximum (dBm) | ||||||
| SF16 | Ue-16.2c |
Without BA and PA: -5 With BA: 13 |
Without BA and PA: -1 Add BA: 15 |
Without BA and PA: -27.5 Plus PA: -37 |
-10 | - | Single mode LC |
| Ue-16.2d |
Without BA and PA: -5 With BA: 13 |
Without BA and PA: -1 Add BA: 15 |
Without BA and PA: -27.5 Plus PA: -37 |
-10 | - | Single mode LC | |
| Ue-16.2f |
Without BA, RA and PA: -5 With BA: 15 |
Without BA, RA and PA: -1 Plus BA: 18 |
Without BA, RA and PA: -27.5 Plus PA: -42 |
-10 | -10 | Single Mode LC | |
