Chinese
English
Huawei OSN2500 SSQ5CXLLN receives and transmits 1 channel STM-1/STM-4/STM-16 optical signal. Optional STM-1/STM-4/STM-16 optical modules are available. Provides abundant alarms and performance events for easy management and maintenance of the equipment. Realize the configuration and scheduling functions of equipment services, monitor service performance, and collect performance events and alarm information. Provide the presence detection function of the PIU of the power access board and the failure detection function of the lightning protection module in the PIU. Provides two 4M HDLC fast emergency channels for realizing MSP, SNCP, TPS inversion and other functions. Supports 1+1 hot backup of cross, clock and master control unit, and the protection mode is non-restoration inversion by default. Provides standard system synchronization clock.
Huawei OSN2500 SSQ5CXLLNSingle Board Feature Code
The single-board characteristic code is the code located after the single-board name in the single-board barcode. The single-board characteristic code is used to describe the type of optical interface.
| Veneer Barcode | Characteristic Code | Optical interface type |
|---|---|---|
| ssr1cxll1604, ssr2Cxll1604, ssq5cxll1604 | 04 | L-16.2 |
| SSQ5CXLL1608 | 08 | L-16.2 |
| ssr1cxll1603, ssr2Cxll1603, ssq5cxll1603 | 03 | L-16.1 |
| SSQ5CXLL1607 | 07 | L-16.1 |
| ssr1cxll1602, ssr2Cxll1602, ssq5cxll1602 | 02 | S-16.1 |
| SSQ5CXLL1606 | 06 | S-16.1 |
| ssr1cxll1601, ssr2Cxll1601, ssq5cxll1601 | 01 | I-16 |
| SSQ5CXLL1605 | 05 | I-16 |
| ssr1cxll414, ssr2Cxll414, ssq5cxll414 | 14 | I-4 |
| SSQ5CXLL419 | 19 | I-4 |
| ssr1cxll413, ssr2Cxll413, ssq5cxll413 | 13 | Ve-4.2 |
| SSQ5CXLL418 | 18 | Ve-4.2 |
| ssr1cxll412, ssr2Cxll412, ssq5cxll412 | 12 | L-4.2 |
| SSQ5CXLL417 | 17 | L-4.2 |
| ssr1cxll411, ssr2Cxll411, ssq5cxll411 | 11 | L-4.1 |
| SSQ5CXLL416 | 16 | L-4.1 |
| ssr1cxll410, ssr2Cxll410, ssq5cxll410 | 10 | S-4.1 |
| SSQ5CXLL415 | 15 | S-4.1 |
| ssr1cxll114, ssr2Cxll114, ssq5cxll114 | 14 | I-1 |
| ssr1cxll113, ssr2Cxll113, ssq5cxll113 | 13 | Ve-1.2 |
| ssr1cxll112, ssr2Cxll112, ssq5cxll112 | 12 | L-1.2 |
| SSQ5CXLL117 | 17 | L-1.2 |
| ssr1cxll111, ssr2Cxll111, ssq5cxll111 | 11 | L-1.1 |
| SSQ5CXLL116 | 16 | L-1.1 |
| ssr1cxll110, ssr2Cxll110, ssq5cxll110 | 10 | S-1.1 |
| SSQ5CXLL115 | 15 | S-1.1 |
Huawei OSN2500 SSQ5CXLLNSingle Board Configuration Parameters
The actual installation slots of the CXLLN single board differ from those shown in the U2000 network management, and the parameters of the CXLLN single board can be configured through the U2000 network management system.
Slot Display
The CXLLN single board occupies one slot in the subrack.
The logical boards on the network management when the Q5CXLLN veneer is plugged into the new backplane are Q2SLN, UCXL, and GSCC. at this time, the logical slots of the Q5CXLLN veneer on the network management are shown in Table 1.
| Single Board | Logical board | Logical slot |
|---|---|---|
| CXLLN | Q2SLN | slot 9, slot 10 |
| UCXL | slot 80, slot 81 | |
| GSCC | slot 82, slot 83 |
The logical boards on the network management when the Q5CXLLN veneer is plugged into the old backplane are Q2SLN, ECXL, and GSCC.At this time, the logical slots of the Q5CXLLN veneer on the network management are shown in Table 2.
| Single Board | Logical board | Logical slot |
|---|---|---|
| CXLLN | Q2SLN | slot 9, slot 10 |
| ECXL | slot 80, slot 81 | |
| GSCC | slot 82, slot 83 |
Huawei OSN2500 SSQ5CXLLNsingle board parameters
With the U2000 network manager, you can set the following main parameters for the CXLLN single board:
- J0 byte setting
- J1 byte setting
- C2 byte setting
- Clock parameter setting
For the specific description of each parameter, please refer to the description in the single board configuration parameters.
Huawei OSN2500 SSQ5CXLLNTechnical Specifications
The CXLLN single-board metrics contain optical interface metrics, laser safety level, mechanical metrics, and power consumption.
Huawei OSN2500 SSQ5CXLLNOptical Interface Specifications
The CXLLN single board can choose three different optical modules, STM-1/STM-4/STM-16.
The optical interface specifications when the CXLLN single board selects the STM-1 optical module are shown in Table 1.
| Item | Indicator value | ||||
|---|---|---|---|---|---|
| Nominal bit rate | 155520 kbit/s | ||||
| Line code type | NRZ coded signal | ||||
| Optical interface type | I-1 | S-1.1 | L-1.1 | L-1.2 | Ve-1.2 |
| Transmission distance (km) | 0～2 | 2～15 | 15～40 | 40～80 | 80～100 |
| Operating wavelength range (nm) | 1260～1360 | 1261～1360 | 1263～1360 | 1480～1580 | 1480～1580 |
| Fiber Type | Single-mode LC | Single-mode LC | Singlemode LC | Singlemode LC | Singlemode LC |
| Transmit optical power range (dBm) | -15 to -8 | -15 to 8 | -5 to 0 | -5 to 0 | -3 to 0 |
| Optical reception sensitivity (dBm) | -23 | -28 | -34 | -34 | -34 |
| Minimum Overload Point (dBm) | -8 | -8 | -8 -8 | -10 | -10 |
| Minimum extinction ratio (dB) | 8.2 | 8.2 | 10 | 10 | 10 |
| Maximum -20dB spectral width (nm) | - | - | - - | 1 | 1 |
| Minimum Side-Mode Rejection Ratio (dB) | - - - 1 1 | - - - - - - - - - - - - - - - - - - - - - - - | - - - - - - - - - - - - - - - - - - - - - - - | 30 | 30 |
The optical interface metrics for the CXLLN single board when the STM-4 optical module is selected are shown in Table 2.
| Item | Indicator value | ||||
|---|---|---|---|---|---|
| Nominal bit rate | 622080 kbit/s | ||||
| Line code type | NRZ coded signal | ||||
| Optical interface type | I-4 | S-4.1 | L-4.1 | L-4.2 | Ve-4.2 |
| Transmission distance (km) | 0～2 | 2～15 | 15～40 | 40～80 | 80～100 |
| Operating wavelength range (nm) | 1261～1360 | 1274～1356 | 1280～1335 | 1480～1580 | 1480～1580 |
| Fiber Type | Single-mode LC | Singlemode LC | Singlemode LC | Singlemode LC | Singlemode LC |
| Transmit optical power range (dBm) | -15 to -8 | -15 to -8 | -3 to 2 | -3 to 2 | -3 to -2 |
| Optical reception sensitivity (dBm) | -23 | -28 | -28 | -28 | -34 |
| Minimum Overload Point (dBm) | -8 | -8 | -8 -8 | -8 -8 | -13 |
| Minimum extinction ratio (dB) | 8.2 | 8.2 | 10 | 10 | 10.5 |
| Maximum -20dB spectral width (nm) | - | - | 1 | 1 | 1 |
| Minimum Side-Mode Rejection Ratio (dB) | - - - - - - - - - - - - - - - - - - - - - - - | - | 30 | 30 | 30 |
The optical interface metrics when STM-16 optical modules are selected for the CXLLN single board are shown in Table 3.
| Item | Indicator value | |||
|---|---|---|---|---|
| Nominal bit rate | 2488320 kbit/s | |||
| Line code type | NRZ coded signal | |||
| Optical interface type | I-16 | S-16.1 | L-16.1 | L-16.2 |
| Transmission distance (km) | 0～2 | 2～15 | 15～40 | 40～80 |
| Operating wavelength range (nm) | 1266～1360 | 1260～1360 | 1280～1335 | 1500～1580 |
| Fiber Type | Single-mode LC | Singlemode LC | Singlemode LC | Single-mode LC |
| Transmit optical power range (dBm) | -10 to -3 | -5 to 0 | -2 to 3 | -2 to 3 |
| Optical receive sensitivity (dBm) | -18 | -18 | -27 | -28 |
| Minimum overload point (dBm) | -3 | 0 | -9 | -9 |
| Minimum extinction ratio (dB) | 8.2 | 8.2 | 8.2 | 8.2 |
| Maximum -20dB spectral width (nm) | - | 1 | 1 | 1 |
| Minimum Side Mode Rejection Ratio (dB) | - - - - - - - - - - - - - - - - - - - - - - - | 30 | 30 | 30 |
The optical interface metrics for the CXLLN veneer when the STM-16 CWDM color optical module is selected are shown in Table 4.
The optical interface specifications for the Q5CXLLN single board are shown in Table 5 when the STM-16 DWDM color optical module is selected.
| Item | Indicator Value |
|---|---|
| CWDM | |
| Nominal bit rate | 2488320kbit/s |
| Optical interface type | Single-mode LC |
| Transmission distance (km) | 80 |
| Transmit optical power range (dBm) | 0～5 |
| Operating wavelength range (nm) | 1471～1611 (Step: 20) |
| Optical reception sensitivity (dBm) | -28 |
| Minimum overload point (dBm) | -9 |
| Maximum allowable channel dispersion (ps/nm) | 1600 |
| Minimum extinction ratio (dB) | 8.2 |
| Maximum -20dB spectral width (nm) | 1 |
| Minimum Side Mode Rejection Ratio (dB) | 30 |
| Item | Metric Value |
|---|---|
| DWDM | |
| Nominal bit rate | 2488320kbit/s |
| Fiber Type | Single-mode LC |
| Transmission distance (km) | 120 |
| Transmit optical power range (dBm) | 0～4 |
| Center frequency (THz) | 192.10～196.00 |
| Center frequency offset (GHz) | ±10 |
| Optical reception sensitivity (dBm) | -28 |
| Minimum overload point (dBm) | -9 |
| Maximum Allowable Channel Dispersion (ps/nm) | 2400 |
| Minimum extinction ratio (dB) | 8.2 |
| Maximum -20dB spectral width (nm) | 0.3 |
| Minimum Side Mode Rejection Ratio (dB) | 30 |
The Q5CXLLN single board supports single-fiber bi-directional optical modules, and the optical interface specifications are shown in Table 6.
| Item | Indicator value | |
|---|---|---|
| Nominal bit rate | 2488320kbit/s | |
| Line code type | NRZ | |
| Optical interface type | S-16.1 | S-16.1 |
| Transmission distance (km) | 2～15 | 2～15 |
| Fiber Type | Single-mode LC | Single-mode LC |
| Transmission operating wavelength (nm) | 1490 | 1310 |
| Receive operating wavelength (nm) | 1310 | 1490 |
| Transmit optical power range (dBm) | -5 to 0 | -5 to 0 |
| Optical receive sensitivity (dBm) | -18 | -18 |
| Minimum overload point (dBm) | 0 | 0 |
| Dispersion Tolerance (ps/nm) | -Dispersion Tolerance (ps/nm) | - |
| Minimum extinction ratio (dB) | 8.2 | 8.2 |
| Maximum -20dB spectral width (nm) | - | - |
| Minimum Side Mode Rejection Ratio (dB) | - | -Side mode rejection ratio (dB) |
Laser Safety Class
The single-board laser safety level is CLASS 1. The maximum output optical power of the single-board optical port is less than 10 dBm (10 mW).
Mechanical Specifications
The mechanical specifications of CXLLN veneer are as follows:
- Veneer size: 25.4mm (W) x 235.2mm (D) x 261.4mm (H)
- Q5CXLLN weight: 1.0kg
Power consumption
Q5CXLLN veneer has a maximum power consumption of 32W at room temperature (25°C).
