18529092692

Home >> News
News
Supply Huawei OSN3500 SSN1AUX System Auxiliary Interface Board
| 2025-11-21|Back

The Huawei OSN3500 SSN1AUX single board provides various management interfaces and auxiliary interfaces for the system, as well as centralized backup of +3.3V power supply for each single board in the subrack, and other functions and features.


Huawei OSN 3500 SSN1AUXFunctions and Features

The AUX single board provides various management interfaces and auxiliary interfaces for the system, and provides centralized backup of +3.3V power supply for each single board of the subrack, and other functions and features.

The specific functions and features of the AUX single board are shown in Table 1.

Table 1 Functions and features of AUX single board
Item Description
Management Interface
  • Provides an OAM interface and supports the X.25 protocol.
  • Provide management serial interface F&f.
  • Provide 10M/100M network management interface.
Auxiliary Interface
  • Provides serial interfaces Serial 1 to Serial 4, which can be used as 4 broadcast data ports and 2 sets of time interfaces, but the two applications are mutually exclusive.
  • The two time interfaces are full-duplex interfaces, supporting two simultaneous time inputs and outputs.
  • The time interfaces and broadcast data ports support both RS422 and RS232 levels.
  • Provides one 64kbit/s isotropic data channel F1 interface.
External Time Interface
  • Support 2 channels of external time input and output, the external time adopts 1pps+TOD mode.
  • For external time input and output interfaces, please refer to the definitions in Table 2 and Table 3.
Clock Interface
  • Provides 2 BITS clock input interfaces and 2 output interfaces with 120Ω impedance.
  • Provides 2 BITS clock input interfaces and 2 output interfaces with an interface impedance of 75Ω.
Switching Interface
  • Provides 16 inputs and 4 outputs of switching alarm interface.
  • Provides 4-way output switching alarm cascade interface.
Cabinet alarm light
  • Provide 4-way cabinet alarm light output interface.
  • Provide 4 cascade interfaces for cabinet alarm light inputs.
Public Service Interface
  • Provide 2-way out subnet connection signaling interface.
  • Provide 1 official telephone interface.
  • Provides 2 outgoing subnet voice interfaces.
External Single Board Communication Interface Provides 1 external single board communication interface COM.
Internal Communication Realizes the inter-board communication function between each single board of the subrack.
Power supply backup and detection
  • Provides centralized backup function of +3.3V power supply for each single board of the subrack (1:N protection for secondary power supply of each single board).
  • Over-voltage (3.8V) and under-voltage (3.1V) detection for 3.3V backup voltage.
Sound alarm Supports audible alarm and alarm cut function.
Network Port Connection Status Detection Support network port connection status detection.
Note: COM port is only for external single board communication, and cannot be used arbitrarily, otherwise it may lead to abnormal Ethernet communication between boards.
Table 2 External Time Input Interface
External Time Input TOD interfacea 1pps interface
1st channel S1 S3 (with RS422 level)
S1 ALMI4 (using TTL level)
2nd circuit S2 S4 (using RS422 level)
S2 ALMI4 (using TTL level)
a: The TOD interface can be set to RS232 or RS422 level as required.
Table 3 External time output interface
External time output TOD interfacea 1pps interface
1st S1 S3 (RS422 level)
2nd way S2 S4 (RS422 level)
a: The TOD interface can be set to RS232 or RS422 level as required.
Instructions:

In order to ensure the normal use of conference calls, the size of each conference call subnet should not exceed 10; if it exceeds 10, please divide it into different conference call subnets.


This chapter of technical information and related SDH equipment troubleshooting process is provided by Shenzhen Optical Transmission Network Technology Company Limited (www.opticaltrans.com), reproduced with permission. Huawei SDH optical transmission equipment, SDH transmission equipment sales phone: 13430988088 Welcome to telephone consultation!


Sell Huawei OSN3500 SSN1AUX_Product Quotation_Sales Manufacturer_Product Characteristics_Product Description_Huawei SDH transmission equipment sales
Supply Huawei OSN3500 SSN1AUX_Troubleshooting_Installation and testing_Technical indicators_Technical parameters_Huawei SDH transmission equipment sales

Contact Us
Name:Mr Zhang
Phone:18529092692
Tel:18529092692
Email:info@opticaltrans.com
Address:Cuiguang 1st Distriuct Buiding 8th, Shenzhen, Guangdong Province
Contact
18529092692
Phone:18529092692
Email:info@opticaltrans.com
Address:Cuiguang 1st Distriuct Buiding 8th, Shenzhen, Guangdong Province
Follow Us
Otrans Technology is a high-tech enterprise deeply engaged in optical transmission and network communication equipment, specializing in...
Copyright © 2025 Otrans all right reserve XML 网站模板