Optix OSN2500 CXL16 Single Board Specifications

CXL16 single-board specifications include optical interface specifications, single-board size, weight, and power consumption.

1. Optical interface specifications

The optical interface specifications of CXL16 single board are shown in Table 1.

Table 1 Optical interface index of CXL16 single board
Item	Indicator value
Nominal bit rate	2488320 kbit/s
Line code type	NRZ coded signal
Optical interface type	I-16	S-16.1	L-16.1	L-16.2
Operating wavelength (nm)	1266～1360	1260～1360	1280～1335	1500～1580
Light source type	MLM	SLM	SLM	SLM
Average Transmitted Optical Power (dBm)	-10 to -3	-5 to 0	-2 to 3	-2 to 3
Minimum sensitivity (dBm)	-18	-18	-27	-28
Minimum Overload Point (dBm)	-3	0	-9	-9
Minimum extinction ratio (dB)	8.2	8.2	8.2	8.2

2. Cross-cutting competencies

The CXL16 single board has the following crossover capacity: high-order crossover capacity: 20Gbit/s; low-order crossover capacity: 20Gbit/s; access capacity: 18.75Gbit/s

3. Clock Access Capability

The clock access capacity of CXL16 single board is as follows:

External input clock: 2 channels, 2048kbit/s or 2048kHz

External output clock: 2-way, 2048kbit/s or 2048kHz

4. Laser safety level

The laser safety level of single board is CLASS 1. The maximum output optical power of single board optical port is less than 10dBm (10mW).

5.Mechanical indicators

CXL16 veneer mechanical indicators are as follows: veneer size: 262.05mm (H) × 220mm (D) × 25.4mm (W); weight: 1.1kg

6.Power consumption

The maximum power consumption of CXL16 veneer at room temperature (25℃) is 40W.

The technical information in this chapter and the related SDH equipment troubleshooting procedures are provided by Shenzhen Optical Transmission Network Technology Co. Huawei SDH optical transmission equipment, SDH transmission equipment sales phone: 13430988088 Welcome to call!