Chinese
English
OSN1800II Product Specifications ( 1800 II Enhanced )
|
Indicator |
Description |
|
|---|---|---|
|
Product Appearance |
|
|
|
External Dimension (mm) |
442 (W) x 220 (D) x 88 (H) (without lugs) |
|
|
Weight (empty box) |
3.6kg |
|
|
Installation |
|
|
|
Number of slots for business boards |
|
|
|
Optical layer crossing capability |
1～9 dimensional ROADM |
|
|
Electric layer switching capacity |
OTN |
|
|
Packet |
|
|
|
TDM |
50Gbit/s high-order capacity, 20Gbit/s low-order capacity |
|
|
Maximum number of waves |
DWDM |
80-wave DWDM system |
|
CWDM |
8-wave CWDM system |
|
|
Center wavelength range |
DWDM: 1529.16nm～1560.61nm (C Band, ITU-T G.694.1) CWDM: 1471nm～1611nm (S+C+L Band, ITU-T G.694.2) |
|
|
Supported service types |
SDH/SONET service, PDH service, OTN service, Ethernet service, PCM service, CPRI service, OBSAI service, SAN service, video and others |
|
|
Maximum single-channel rate |
200Gbit/s |
|
|
Line rate |
2.5Gbit/s, 10Gbit/s , 50Gbit/s, 100Gbit/s , 200Gbit/s |
|
|
Maximum total number of managed FO810s and CPE850s per OSN 1800 network element |
50 Description:
The exact value needs to be calculated based on the actual number of C12X5& C15Xn veneers installed on the network element and the number of veneers interfacing with CPE850. |
|
|
Supported pluggable optical/electrical modules |
|
|
|
Network Topology |
Point-to-point, chain, star, ring, ring with chain, ring intersection, ring tangency |
|
|
Network level protection (OTN) |
Customer-side 1+1 protection, in-board 1+1 protection, ODUk SNCP, optical line protection, tributary SNCP, LPT |
|
|
Network level protection (packet) |
Tunnel APS, PW APS/FPS, LPT, LAG, ERPS , LMSP, Packet SNCP, MRPS |
|
|
Network level protection (TDM) |
|
|
|
Device-level protection |
|
|
|
Optical power management |
ALS, AGC , OPA, IPA |
|
|
Maintenance |
|
|
|
Simple Operation and Maintenance |
SOM Smart Optical Management System , Intelligent Fiber Management System |
|
|
Synchronization |
|
|
|
ASON |
OTN Network: Optical Layer ASON (only supported by Z2UXCL) |
|
|
Power Supply |
DC power input
AC Power Input
|
|
|
Equipment operating environment |
Box temperature |
|
|
Box relative humidity |
|
|
|
ETSI Standard |
ETSI Class 3.1 Description:
The ETSI standard is for temperature and humidity standards for server rooms. |
|
1800 II Enhanced Product Highlights
-
MS-OTN product form factor, support any service access, unified transmission
- Single sub-frame supports maximum 200G OTN crossover capacity, 160G packet crossover capacity, 50G SDH high-order crossover capacity and 20G SDH low-order crossover capacity, and full granular service crossover and multiplexing for ODUk (k=0, 1, 2, 2e , 3, 4, C2, flex).
- Supports unified line veneer and seamless sharing of line transmission bandwidth for services after OTN/SDH/PKT different service plane scheduling.
- From low rate services (e.g. FE) to large bandwidth services can be encapsulated into OTN frame format for unified transmission.
-
Green and Easy Maintenance, Low Power Consumption, Easy Deployment
- Typical power consumption of 2U highly integrated equipment is low, which is green and energy-saving, and reduces customer OPEX.
- Support 19-inch cabinet and ETSI cabinet, support DC power supply, easy to deploy, strong environmental applicability.
- Conforms to ITU-T G.709 recommendations for OTN in-band management.
-
Excellent architecture design, high reliability, worry-free data transmission
- Provides various network-level protection, comprehensively protects the service.
- Provides device-level protection: power protection, fan redundancy, and 1+1 protection for master cross-clock boards.
The related technical information in this chapter and the SDH equipment troubleshooting process are collected and organized by Shenzhen Optical Transmission Network Technology Company Limited (www.opticaltrans.com), please retain! Our company specializes in the sale of Huawei SDH optical transmission equipment,SDH transmission equipment.
