Protection requirements

18529092692

  • 3.png
  • 1.png
  • 2.png
  • 3.png
  • 1.png
  • 2.png
OSN9800 TNU3N402 2x100Gbit/s line service processing boards
  • Functional versions of the OSN9800 N402 single board are TNU1, TNU2, TNU3, TNU5, TNV1, TNV2, TNV3. TNU3N402 2 x 100 Gbit/s Line Service Processing Board (2 x 100 Gbit/s Line Service Processing Board)


Consultation hotline:
18529092692
Product Introduction

Products

OSN9800 2x100 Gbit/s Line Service Processing Board

The OSN9800 N402 boards are available in the following functional versions: TNU1, TNU2, TNU3, TNU5, TNV1, TNV2, TNV3. The boards belong to the OTN line class of boards and realize the interconversion of the following signals: 160 x ODU0/80 x ODU1/20 x ODU2/20 x ODU2e/4 x ODU3/2 x ODU4/. 160 x ODUflex<->2 x OTU4. 160 x ODUflex<->2 x OTU4. OTU4 is a DWDM standard wavelength compliant with ITU-T G.694.1 recommendation. The same optical port supports mixed transmission of ODU0, ODU1, ODU2/ODU2e, ODU3, ODUflex.N402 adopts coherent reception technology and is applied in coherent systems. The single board supports functions and features such as electrical layer crossover, OTN interface, and ESC. The single board consists of WDM side optical module, signal processing module, control and communication module, and power module.

Attention:

Single boards using different optical line code types cannot be docked, for example, QPSK, QPSK wDCM, QPSK wDCM-Enhanced are different code types, T51 uses QPSK, T61 uses QPSK wDCM, and they cannot be docked;

T6x supports AFEC level configurable, docking is supported only when the AFEC level is configured to be the same at both ends.The transmission distance of T6x is compared as follows: T61>T62>T65, and the actual transmission distance is based on the shorter one after docking of different veneers;

Single boards with different error correction codes cannot be docked. HFEC, SDFEC, SDFEC2, etc. are different error correction codes.


Functions and Features


The OSN9800 N402 single board supports functions and features such as layer crossing, OTN interface, ESC, etc. The N402 single board supports line mode and trunk mode. The functions and features of line mode and trunk mode are shown in Table 1 and Table 2, respectively.

OSN9800 TNU3N402 Single Board Functions and Features (Line Mode)

Functions and FeaturesDescription
Basic Functions

Realizes interconversion of the following signals:

160 x ODU0/80 x ODU1/20 x ODU2/20 x ODU2e/4 x ODU3/2 x ODU4/160 x ODUflex<->2 x OTU4

Mixed transmission of ODU0, ODU1, ODU2, ODU2e, ODU3, ODUflex is supported on the same optical port.

Crossover Capability

Support to realize service scheduling with cross board.

160 x ODU0/80 x ODU1/20 x ODU2/20 x ODU2e/4 x ODU3/2 x ODU4/160 x ODUflex

OTN Functions
  • The OTU4 interface is supported on the wavelength division side.

  • Adopts ITU-T G.709 recommended frame format and overhead handling.

  • OTU4 layer: supports SM overhead processing.

  • ODUk (k=0, 1, 2, 2e, 3, 4, flex) layer: supports PM and TCM overhead processing, as well as non-intervention monitoring of PM and TCM.

WDM Specifications

Supports ITU-T G.694.1 specifications for DWDM.

Wavelength Tunable Function

Supports wavelength tunable optical modules. If the wavelength tunable optical module is configured, it can realize that the WDM side optical signal can be tunable in the 80-wave range in the C-band 50 GHz interval.

TNU5N402 can realize that the wavelength-division side optical signal is adjustable within the 96-wave range of the extended C-band 50 GHz interval.

ESC FunctionSupport
PRBS Function

The WDM side supports the PRBS function.

LPT functionNot supported
Error correction coding
  • TNU1N402: SDFEC

  • TNU2N402/TNU3N402: SDFEC2

  • TNU5N402:

    • Adoption of OTU4-4×28G-10km module: FEC

    • Other modules: SDFEC2, HFEC PLUS

  • TNV1N402: FEC

  • TNV2N402: HFEC

  • TNV3N402: HFEC PLUS

Description:

Veneers with different error correction codes cannot be docked.

Performance Surveillance and Alarm Monitoring
  • Provides BIP8 byte monitoring (burst mode) to locate line faults.

  • Provides the following monitoring functions: laser bias current monitoring, laser operating temperature monitoring, optical power monitoring, etc.

  • Supports OTN performance monitoring and alarm monitoring.

Relay board

The WDM side signal of N402 board can be relayed by other N401, N402, LTX, NS4 boards of the same FEC type. For example:

  • N402 single board of type T11 can relay through other N401, N402, LTX, NS4 single boards of type T11. That is, the TNU1N402T11 veneer can be trunked through the TNU1N401, TNU1N402, TN54NS4, TN56NS4, TN11LTX, and TN12LTX veneers of type T11.

ALS FunctionNot supported
Test frame functionNot supported
IEEE 1588v2Not Supported
Physical Layer Clock
  • TNU3N402/TNU5N402: Supported

  • Other:Not Supported

Electrical Layer ASONSupported
Optical Layer ASONSupport

Description:

When black and white optical modules are used, optical layer ASON is not supported.

Protection Mode.
  • ODUk SNCP protection is supported.

  • Supports branch SNCP protection.

  • Supports on-board 1+1 protection (realized with QCP or OLP or DCP single board).

  • Port-level M:N protection: supported only for TNU3N402/TNU5N402/TNV3N402 single boards. For TNU3N402/TNU5N402/TNV3N402 single boards, port-level M:N protection is only supported by ver.c and above.

Description:

Branch SNCP protection is not supported when the scheduling granule is ODUflex.

LoopbackWavelength division side loopbackODU3 channel loopbackODU2 Channel LoopbackODU1 channel loopbackODU0 Channel LoopbackODUflex channel loopback
SupportedSupportedSupportedSupportedSupportedSupport

Note: TNV1N402C01 does not support trunk mode.TNU5N402 does not support trunk mode when OTU4-4×28G-10km module is used.


OSN9800 TNU3N402 Single Board Functions and Features (Trunking Mode)

Functions and FeaturesDescription
Basic FunctionsUsed as an electrical relay station in the system to realize the electrical relay function of the corresponding optical signal.
Relay rate

OTU4: OTN service with a rate of 111.81Gbit/s

OTN Function
  • The WDM side supports the OTU4 interface.

  • Adopts ITU-T G.709 recommended frame format and overhead processing.

  • OTU4 layer: supports SM overhead processing.

  • ODU4 layer: supports PM and TCM overhead processing, as well as non-intervention monitoring of PM and TCM.

WDM Specifications

Supports DWDM specifications of ITU-T G.694.1.

Wavelength Tunable Function

Supports wavelength tunable optical modules. If the wavelength tunable optical module is configured, it can realize that the WDM side optical signal can be tunable in the 80-wave range in the 50 GHz interval of C-band.

TNU5N402 can realize that the wavelength-division side optical signal is adjustable within the 96-wave range of the extended C-band 50 GHz interval.

ESC FunctionSupport
PRBS FunctionNot supported
Error Correction Coding
  • TNU1N402: SDFEC

  • TNU2N402/TNU3N402: SDFEC2

  • TNU5N402: SDFEC2, HFEC PLUS

  • TNV2N402: HFEC

  • TNV3N402: HFEC Plus

Description:

Veneers with different error correction codes cannot be docked.

Performance Surveillance and Alarm Monitoring
  • Provides BIP8 byte monitoring (burst mode) to locate line faults.

  • Provides the following monitoring functions: laser bias current monitoring, laser operating temperature monitoring, optical power monitoring, etc.

  • Supports OTN performance monitoring and alarm monitoring.

ALS FunctionNot supported
Test frame functionNot supported
IEEE 1588v2Not Supported
Physical Layer ClockingNot supported
Electrical Layer ASONNot Supported
Optical Layer ASONSupported

Description:

When black and white light optical modules are used, optical layer ASON is not supported.

Protection ModeDoes not support the
LoopbackNot supported



This chapter related to the technical characteristics of SDH equipment by Shenzhen Guihang Network Technology Co., Ltd. collected and organized (www.opticaltrans.com), reproduced please retain! Our company specializes in Huawei OSN3500 equipment,OSN2500,OSN1500,SDH transmission equipment sales.

Huawei TNU3N402 Purchase Price_Product Description_Hardware Description_Technical Parameters_Product Characteristics-Huawei SDH transmission equipment sales

Supply Optix OSN9800 TNU3N402 Quote_Agent Price_Sales Manufacturer_Product Supplier-Huawei SDH transmission equipment sales

Online Ordering
Contact Us
Name:Mr Zhang
Phone:18529092692
Tel:18529092692
Email:info@opticaltrans.com
Address:Cuiguang 1st Distriuct Buiding 8th, Shenzhen, Guangdong Province
Contact
18529092692
Phone:18529092692
Email:info@opticaltrans.com
Address:Cuiguang 1st Distriuct Buiding 8th, Shenzhen, Guangdong Province
Follow Us
Otrans Technology is a high-tech enterprise deeply engaged in optical transmission and network communication equipment, specializing in...
Copyright © 2025 Otrans all right reserve XML