Protection requirements

18529092692

Chinese English
Home >> Products >> Huawei SDH Optical Transmission Equipment >> Huawei OTN WDM >> OTN line/branch boards
OTN line/branch boards
Optix OSN8800 TN13OAU Optical Amplifier Boards
  • Optix OSN8800 TN13OAU1 single board belongs to fiber optic amplifier class single board, complete optical signal amplification function, can be used for both the transmitter and receiver.OAU1 single board supports gain adjustment, online optical performance monitoring, gain locking technology, transient control technology and other functions and features.

    • Consultation hotline：
    18529092692
    Product Introduction
    Products
    Huawei Optical Transmission Equipment OSN8800 TN13OAU Technical Specifications

    The OAU1 single board belongs to the fiber amplifier class of single boards, which completes the amplification function of optical signals, and can be used at the transmitter and receiver ends.

    The application of the OAU1 single board in the WDM system is shown in Figure 1.

    Figure 1 Application of OAU1 single board in WDM system


    OSN8800 TN13OAU Functions and Features

    OAU1 single board supports gain adjustment, online optical performance monitoring, gain locking technology, transient control technology and other functions and features.

    The specific functions and features of the OAU1 single board are shown in Table 1.

    Table 1 OAU1 Single Board Functions and Characteristics
    Functions and Features Description
    Basic Functions
    • It can amplify the input optical signals of C-band, and the total wavelength range covers 1529nm～1561nm.
    • It can support the system to realize powerless relay transmission across different bands.
    Gain Adjustment
    OAU1 single board adjusts the gain according to the input optical power, and realizes continuous adjustability within the following overall gain range:
    • OAU100: 16dB to 25.5dB
    • OAU101/OAU102: 20dB～31dB
    • OAU103: 24dB～36dB
    • OAU105: 23dB～34dB
    • OAU106：16dB～23dB
    • OAU107: 19dB to 27dB, supports adjustable maximum total output power.
    Description:

    The OAU1 indicator only provides the nominal gain value of the OAU1 single board, and the actual detected value differs from the nominal gain value.

    Online Optical Performance Monitoring

    Provides an online monitoring optical port, from which a small amount of optical signals can be output to a spectrum analyzer or a spectrum analyzer board to monitor the spectral and optical performance of the combined wave optical signals without interrupting the service.

    Gain Locking Technology The EDFA within the single board has a gain locking function, which does not affect the signal gain of other channels when increasing or decreasing one or several channels or when some channels fluctuate in optical signals.
    Working Modes Supports gain lock mode and power lock mode.
    • In gain lock mode, the EDFA gain is adjustable and supports the query of actual gain. Gain lock mode is used by default.
    • Power lock mode, when applied to Dummy Light scene, you need to set the output light power lock.
    Transient Control Technology The EDFA in the single board has the transient control function, which enables the system to realize smooth upgrade and expansion by suppressing the fluctuation of channel optical power when adding or reducing channels.
    Performance Monitoring and Alarm Monitoring
    • Detection and reporting of optical power
    • Provide temperature control of pump laser
    • Provide pump drive current, backlight current, cooling current, pump laser temperature detection and single-board ambient temperature detection.
    Optical layer ASON Support
    Description:
    TN11OAU1 does not support "SOM equalization" for single-wave modulation of the optical layer.
    OSN8800 TN13OAU Specifications

    The single-board specifications include optical interface specifications, single-board size, weight and power consumption.

    Optical interface specifications
    Table 1 TN12OAU100 single-board optical interface metrics
    Item Unit Item
    Working wavelength range nm 1529～1561 1529～1561 1529～1561
    Nominal gain dB 16 dB 22 25.5
    Total Input Power Range dBm -20 to 2 -26 to -4 -32 to 7.5
    Single channel input power range 40 channels dBm -32 to 14 -32 to 20 -32～-23.5
    80 channels dBm -32 to 17 -32～-23 -32 to -26.5
    Nominal single-wave input optical power 40 channels dBm -14 -20 -23.5
    80 channels dBm -17 -23 -26.5
    Nominal single-wave output optical power 40 channels dBm 2 2 2 2
    80 channels dBm -1 -1 -1
    Noise Factor (NF)a dB ≤8 ≤5.5 ≤5.5
    Gain response time for channel add/remove ms <10 <10 <10
    Channel Gain dB 16 to 25.5
    Gain flatness dB ≤2 ≤2 ≤2
    Multi-Channel Gain Skew dB/dB ≤2 ≤2 ≤2
    Input Reflection Coefficient dB <-40 <-40 <-40
    Output reflection coefficient dB <-40 <-40 <-40
    Pump leakage at input dBm <-30 <-30 <-30
    Maximum Reflection Coefficient Tolerable at Input dB -27 -27 27 -27
    Maximum tolerable reflection coefficient of output dB -27 -27 -27
    Maximum total output power dBm 18 18 18
    Polarization dependent loss dB ≤0.5 ≤0.5 ≤0.5
    VI-VO Intrinsic insertion loss dB ≤1.5
    Attenuation dynamic range dB 20
    Adjustment accuracy dB 1
    a: The gain is continuously adjustable, the noise coefficient is different under different gain conditions, only the noise of typical gain is given above.
    Description:

    The single board supports ±2.5dB of epi gain, but it affects the gain flatness and is limited to short-term use.

    Table 2 TN11OAU101/TN12OAU101/TN13OAU101 Single Board Optical Interface Specifications
    Item Unit Indicator
    Working wavelength range nm 1529～1561 1529～1561 1529～1561
    Nominal gain dB 20 dB 20 dB 31
    Total Input Power Range dBm -32 to 0 -32 to 6 -32 to 11
    Single channel input power range 40 channels dBm -32 to 16 -32 to -22 -32 to -27
    80 channels dBm -32 to -19 -32～-25 -32 to -30
    Nominal single-wave input optical power 40 channels dBm -16 -22 -27
    80 channels dBm -19 -25 -30
    Nominal single-wave output optical power 40 channels dBm 4 4 4 4
    80 channels dBm 1 1 1
    Noise Factor (NF)a dB

    ≤8.5 (TN11OAU101, TN12OAU101)

    ≤7.5 (TN13OAU101)

    		 ≤5.5 ≤5.5
    Gain response time for channel gain increase/removal ms <10 <10 <10
    Channel Gain dB 20 to 31
    Gain flatness dB ≤2.0 ≤2.0 ≤2.0
    Multi-Channel Gain Skew dB/dB ≤2.0 ≤2.0 ≤2.0
    Input reflection coefficient dB <-40 <-40 <-40
    Output reflection coefficient dB <-40 <-40 <-40
    Pump leakage at input dBm <-30 <-30 <-30
    Maximum Reflection Coefficient Tolerable at Input dB -27 -27 27 -27
    Maximum tolerable reflection coefficient of output dB -27 -27 -27
    Maximum total output power dBm 20 20 20
    Polarization dependent loss dB ≤0.5 ≤0.5 ≤0.5
    VI-VOb Intrinsic insertion loss dB ≤1.5
    Attenuation dynamic range dB 20
    Adjustment accuracyb dB 1
    a: The gain is continuously adjustable, the noise coefficient is different under different gain conditions, only the noise of typical gain is given above.

    b: Only supported by TN12OAU1 and TN13OAU1.

    Description:

    The single board supports ±2.5dB of epi gain, but affects gain flatness and is for short-term use only.

    Table 3 TN11OAU102/TN12OAU102 Single Board Optical Interface Specifications
    Item Unit Indicator
    Working wavelength range nm 1529～1561 1529～1561 1529～1561
    Nominal gain dB 20 dB 20 dB 31
    Total Input Power Range dBm -32 to -3 -32 to -9 -32 to 14
    Single channel input power range 40 channels dBm -32 to 19 -32 to 25 -32 to 30
    80 channels dBm -32 to 22 -32～-28 -32～-28
    Nominal single-wave input optical power 40 channels dBm -19 -25 -30
    80 channels dBm -22. -28. -28 -32
    Nominal single-wave output optical power 40 channels dBm 1 1 1 1
    80 channels dBm -2 -2 -2 -2
    Noise Factor (NF)a dB ≤7.5 ≤5.5 ≤5.5
    Gain response time for channel add/remove ms <10 <10 <10
    Channel Gain dB 20 to 31
    Gain flatness dB ≤2 ≤2 ≤2
    Multi-Channel Gain Skew dB/dB ≤2 ≤2 ≤2
    Input Reflection Coefficient dB <-40 <-40 <-40
    Output reflection coefficient dB <-40 <-40 <-40
    Pump leakage at input dBm <-30 <-30 <-30
    Maximum Reflection Coefficient Tolerable at Input dB -27 -27 27 -27
    Maximum tolerable reflection coefficient of output dB -27 -27 -27
    Maximum total output power dBm 17 17 17
    Polarization dependent loss dB ≤0.5 ≤0.5 ≤0.5
    VI-VOb Intrinsic insertion loss dB ≤1.5
    Attenuation dynamic range dB 20
    Adjustment accuracyb dB 1
    a: The gain is continuously adjustable, the noise coefficient is different under different gain conditions, only the noise of typical gain is given above.

    b: Only supported by TN12OAU1.

    Description:

    The single board supports ±2.5dB of epi gain, but affects gain flatness and is for short-term use only.

    Table 4 TN11OAU103/TN12OAU103/TN13OAU103 Single Board Optical Interface Specifications
    Item Unit Indicator
    Working wavelength range nm 1529～1561 1529～1561 1529～1561
    Nominal gain dB 24 dB 24 dB 24 29 36
    Total Input Power Range dBm -32 to -4 -32 to -9 -32 to -16
    Single channel input power range 40 channels dBm -32 to 20 -32 to 25 -32 to -25
    80 channels dBm -32 to 23 -32 to -28 -32 to -28
    Nominal single-wave input optical power 40 channels dBm -20 -25 -32
    80 channels dBm -23 -28 -32
    Nominal single-wave output optical power 40 channels dBm 4 4 4 4
    80 channels dBm 1 1 1
    Noise Factor (NF)a dB

    ≤7.5 (TN11OAU103, TN12OAU103)

    ≤6.5 (TN13OAU103)

    		 ≤5.5 ≤5.5
    Gain response time for channel gain increase/removal ms <10 <10 <10
    Channel Gain dB 24 to 36
    Gain flatness dB ≤2 ≤2 ≤2
    Multi-Channel Gain Skew dB/dB ≤2 ≤2 ≤2
    Input Reflection Coefficient dB <-40 <-40 <-40
    Output reflection coefficient dB <-40 <-40 <-40
    Pump leakage at input dBm <-30 <-30 <-30
    Maximum Reflection Coefficient Tolerable at Input dB -27 -27 27 -27
    Maximum tolerable reflection coefficient of output dB -27 -27 -27
    Maximum total output power dBm 20 20 20
    Polarization dependent loss dB ≤0.5 ≤0.5 ≤0.5
    VI-VOb Intrinsic insertion loss dB ≤1.5
    Attenuation dynamic range dB 20
    Adjustment accuracyb dB 1
    a: The gain is continuously adjustable, the noise coefficient is different under different gain conditions, only the noise of typical gain is given above.

    b:Only TN12OAU1 and TN13OAU1 are supported.

    Description:

    The single board supports ±2.5dB of epi gain, but it affects gain flatness and is for short-term use only.

    Table 5 TN11OAU105/TN12OAU105/TN13OAU105 Single Board Optical Interface Specifications
    Item Unit Indicator
    Working wavelength range nm 1529～1561 1529～1561 1529～1561
    Nominal gain dB 23 dB Nominal gain dB 23 34
    Total Input Power Range dBm -32 to 0 -32 to 7 -32 to 11
    Single channel input power range 40 channels dBm -32 to 16 -32 to 23 -32 to -27
    80 channels dBm -32 to 19 -32～-26 -32～-30
    Nominal single-wave input optical power 40 channels dBm -16 -23 -27
    80 channels dBm -19 -26 -30
    Nominal single-wave output optical power 40 channels dBm 7 7 7
    80 channels dBm 4 4 4
    Noise Factor (NF)a dB <8.5 <6 <6
    Gain response time for channel add/remove ms <10 <10 <10
    Channel Gain dB 23 to 34
    Gain flatness dB ≤2 ≤2 ≤2
    Multi-Channel Gain Skew dB/dB ≤2 ≤2 ≤2
    Input Reflection Coefficient dB <-40 <-40 <-40
    Output reflection coefficient dB <-40 <-40 <-40
    Pump leakage at input dBm <-30 <-30 <-30
    Maximum Reflection Coefficient Tolerable at Input dB -27 -27 27 -27
    Maximum tolerable reflection coefficient of output dB -27 -27 -27
    Maximum total output power dBm 23 23 23
    Polarization dependent loss dB ≤0.5 ≤0.5 ≤0.5
    VI-VOb Intrinsic insertion loss dB ≤1.5
    Attenuation dynamic range dB 20
    Adjustment accuracyb dB 1
    a: The gain is continuously adjustable, the noise coefficient is different under different gain conditions, only the noise of typical gain is given above.

    b: Only supported by TN12OAU1 and TN13OAU1.

    Description:

    The single board supports ±2.5dB of epi gain, but affects gain flatness and is for short-term use only.

    Table 6 TN13OAU106 Single Board Optical Interface Metrics
    Item Unit Indicator
    Working wavelength range nm 1529～1561 1529～1561 1529～1561
    Nominal gain dB 16 dB 19 23
    Total Input Power Range dBm -24 to 4 -24 to 1 -24 to 3
    Single channel input power range 40 channels dBm -24 to 12 -24 to 15 -24 to 19
    80 channels dBm -24 to 15 -24 to 18 -24 to 22
    Nominal single-wave input optical power 40 channels dBm -12 -15 -19
    80 channels dBm -15 -18 -22
    Nominal single-wave output optical power 40 channels dBm 4 4 4 4
    80 channels dBm 1 1 1
    Noise Factor (NF)a dB ≤7 ≤6 ≤5
    Gain response time for channel add/remove ms <10 <10 <10
    Channel Gain dB 16 to 23
    Gain flatness dB ≤2 ≤2 ≤2
    Multi-Channel Gain Skew dB/dB ≤2 ≤2 ≤2
    Input Reflection Coefficient dB <-40 <-40 <-40
    Output reflection coefficient dB <-40 <-40 <-40
    Pump leakage at input dBm <-30 <-30 <-30
    Maximum Reflection Coefficient Tolerable at Input dB -27 -27 27 -27
    Maximum tolerable reflection coefficient of output dB -27 -27 -27
    Maximum total output power dBm 20 20 20
    Polarization dependent loss dB ≤0.5 ≤0.5 ≤0.5
    VI-VO Intrinsic insertion loss dB ≤1.5
    Attenuation dynamic range dB 20
    Adjustment accuracy dB 1
    a: The gain is continuously adjustable, the noise coefficient is different under different gain conditions, only the noise of typical gain is given above.
    Description:

    The single board supports ±2.5dB of epi gain, but it affects the gain flatness and is limited to short-term use.

    Table 7 TN13OAU107 Single Board Optical Interface Metrics (Maximum Total Output Power 23dBm)
    Item Unit Indicator
    Working wavelength range nm 1529～1561 1529～1561 1529～1561
    Nominal gain dB 19 dB 19 dB 27
    Total Input Power Range dBm -25 to 4 -25 to 1 -25 to -4
    Single channel input power range 40 channels dBm -25 to 12 -25 to 15 -25 to 20
    80 channels dBm -25 to 15 -25 to 18 -25 to 23
    Nominal single-wave input optical power 40 channels dBm -12 -15 -20
    80 channels dBm -15 -18 -23
    Nominal single-wave output optical power 40 channels dBm 7 7 7
    80 channels dBm 4 4 4
    Noise Factor (NF)a dB ≤7.5 ≤6 ≤5.5
    Gain response time for channel add/remove ms <10 <10 <10
    Channel Gain dB 19 to 27
    Gain flatness dB ≤2 ≤2 ≤2
    Multi-Channel Gain Skew dB/dB ≤2 ≤2 ≤2
    Input Reflection Coefficient dB <-40 <-40 <-40
    Output reflection coefficient dB <-40 <-40 <-40
    Pump leakage at input dBm <-30 <-30 <-30
    Maximum Reflection Coefficient Tolerable at Input dB -27 -27 27 -27
    Maximum tolerable reflection coefficient of output dB -27 -27 -27
    Maximum total output power dBm 23 23 23
    Polarization dependent loss dB ≤0.5 ≤0.5 ≤0.5
    VI-VO Intrinsic insertion loss dB ≤1.5
    Attenuation dynamic range dB 20
    Adjustment accuracy dB 1
    a: The gain is continuously adjustable, the noise coefficient is different under different gain conditions, only the noise of typical gain is given above.
    Description:

    The single board supports ±2.5dB of epi gain, but it affects the gain flatness and is limited to short-term use.

    Table 8 TN13OAU107 Single Board Optical Interface Metrics (Maximum Total Output Power 22dBm)
    Item Unit Indicator
    Working wavelength range nm 1529～1561 1529～1561 1529～1561
    Nominal gain dB 19 dB 19 dB 27
    Total Input Power Range dBm -25 to 3 -25 to 0 -25 to -5
    Single channel input power range 40 channels dBm -25 to 13 -25 to 16 -25 to 21
    80 channels dBm -25 to 16 -25 to 19 -25 to 24
    Nominal single-wave input optical power 40 channels dBm -13 -16 -21
    80 channels dBm -16 -19 -24
    Nominal single-wave output optical power 40 channels dBm 6 6 6
    80 channels dBm 3 3 3
    Noise Factor (NF)a dB ≤7.5 ≤6 ≤5.5
    Gain response time for channel add/remove ms <10 <10 <10
    Channel Gain dB 19 to 27
    Gain flatness dB ≤2 ≤2 ≤2
    Multi-Channel Gain Skew dB/dB ≤2 ≤2 ≤2
    Input Reflection Coefficient dB <-40 <-40 <-40
    Output reflection coefficient dB <-40 <-40 <-40
    Pump leakage at input dBm <-30 <-30 <-30
    Maximum Reflection Coefficient Tolerable at Input dB -27 -27 27 -27
    Maximum tolerable reflection coefficient of output dB -27 -27 -27
    Maximum total output power dBm 22 22 22
    Polarization dependent loss dB ≤0.5 ≤0.5 ≤0.5
    VI-VO Intrinsic insertion loss dB ≤1.5
    Attenuation dynamic range dB 20
    Adjustment accuracy dB 1
    a: The gain is continuously adjustable, the noise coefficient is different under different gain conditions, only the noise of typical gain is given above.
    Description:

    The single board supports ±2.5dB of epi gain, but it affects the gain flatness and is limited to short-term use.

    Table 9 TN13OAU107 Single Board Optical Interface Metrics (Maximum Total Output Power 21dBm)
    Item Unit Indicator
    Working wavelength range nm 1529～1561 1529～1561 1529～1561
    Nominal gain dB 19 dB 19 dB 27
    Total Input Power Range dBm -25 to 2 -25 to 1 -25 to 6
    Single channel input power range 40 channels dBm -25 to 14 -25 to 17 -25 to 22
    80 channels dBm -25 to 17 -25 to 20 -25～-20
    Nominal single-wave input optical power 40 channels dBm -14 -17 -22
    80 channels dBm -17 -20 -20 -25
    Nominal single-wave output optical power 40 channels dBm 5 5 5 5
    80 channels dBm 2 2 2
    Noise Factor (NF)a dB ≤7.5 ≤6 ≤5.5
    Gain response time for channel add/remove ms <10 <10 <10
    Channel Gain dB 19 to 27
    Gain flatness dB ≤2 ≤2 ≤2
    Multi-Channel Gain Skew dB/dB ≤2 ≤2 ≤2
    Input Reflection Coefficient dB <-40 <-40 <-40
    Output reflection coefficient dB <-40 <-40 <-40
    Pump leakage at input dBm <-30 <-30 <-30
    Maximum Reflection Coefficient Tolerable at Input dB -27 -27 27 -27
    Maximum tolerable reflection coefficient of output dB -27 -27 -27
    Maximum total output power dBm 21 21 21
    Polarization dependent loss dB ≤0.5 ≤0.5 ≤0.5
    VI-VO Intrinsic insertion loss dB ≤1.5
    Attenuation dynamic range dB 20
    Adjustment accuracy dB 1
    a: The gain is continuously adjustable, the noise coefficient is different under different gain conditions, only the noise of typical gain is given above.
    Description:

    The single board supports ±2.5dB of epi gain, but it affects the gain flatness and is limited to short-term use.

    Mechanical Parameters
    • Panel dimensions:
      • TN11OAU1/TN12OAU1: 50.8 mm (W) x 220 mm (D) x 264.6 mm (H)
      • TN13OAU1: 25.4 mm (W) x 220 mm (D) x 264.6 mm (H)
    • Weight:
      • TN11OAU1/TN12OAU1: 1.8 kg
      • TN13OAU1: 1.6 kg
    Power consumption
    Board Name Typical power consumption of single board (W) Maximum power consumption of single boarda (W)
    TN11OAU101 18.0 24.0
    TN11OAU102 14.0 18.0
    TN11OAU103 18.0 24.0
    TN11OAU105 22.0 29.0
    TN12OAU100 11.0 14.0
    TN12OAU101 12.0 15.0
    TN12OAU102 10.0 13.0
    TN12OAU103 12.0 15.0
    TN12OAU105 15.0 21.0
    TN13OAU101 12.0 15.0
    TN13OAU103 12.0 15.0
    TN13OAU105 15.0 21.0
    TN13OAU106 12.0 15.0
    TN13OAU107 15.0 21.0
    a: Maximum power consumption refers to the value measured at the maximum ambient temperature of the device during normal operation.

    This producttechnical parametersandproduct characteristicsare provided by Shenzhen Guihang Network Technology Co., Ltd (www.opticaltrans.com), please retain.Huawei SDH Optical Transmission Equipment,SDH Transmission EquipmentSales Tel: 18529092692 Welcome to call us!



    Huawei TN13OAU103 Purchase Price_Product Description_Hardware Description_Technical Parameters_Product Characteristics-Huawei SDH transmission equipment sales
    Supply Optix OSN8800 TN13OAU103 Quote_Agent Price_Sales Manufacturer_Product Supplier-Huawei SDH Transmission Equipment Sales
    Online Ordering
    Related products
    Recommended Product
    Contact Us
    Name：Mr Zhang
    Phone：18529092692
    Tel：18529092692
    Email：info@opticaltrans.com
    Address：Cuiguang 1st Distriuct Buiding 8th， Shenzhen， Guangdong Province
    Contact
    18529092692
    Phone：18529092692
    Email：info@opticaltrans.com
    Address：Cuiguang 1st Distriuct Buiding 8th， Shenzhen， Guangdong Province
    Follow Us
    Otrans Technology is a high-tech enterprise deeply engaged in optical transmission and network communication equipment, specializing in...
    Copyright © 2025 Otrans all right reserve XML 网站模板