18529092692

Home >> News
News
OSN1500 Equipment Product Specifications
| 2025-11-21|Back

Introduces the product (hereinafter referred to as OptiX OSN device) appearance and system specifications.

Table 1 Product appearance and specifications

Indicator

Description

Product Appearance

OptiX OSN 1500A:


<a href='/Product/2683703210.html' target='_blank'><strong>OSN1500</strong></a>

OptiX OSN 1500B:


<a href='/Product/2683703210.html' target='_blank'><strong>OSN1500</strong></a>

External Dimensions (mm)

  • OptiX OSN 1500A: 444 (W) x 262 (D) x 131 (H)
  • OptiX OSN 1500B: 444 (W) x 263 (D) x 221 (H)

Number of slots for business boards

  • OptiX OSN 1500A: 10 slots for processing boards
  • OptiX OSN 1500B: 12 processing board slots, 4 interface board slots

Device Capacity

Packet

8 Gbit/s packet capacity

TDM 60Gbit/s high-order capacity, 20Gbit/s low-order capacity

Supported Service Types

SDH, PDH, ATM, CES, Ethernet, PCM, SAN, video and others

Network Topology

Point-to-point, chain, star, ring, ring with chain, ring intersection, ring tangent

Backup and Protection

Network level protection (packetized) Tunnel 1:1/1+1 APS, PW 1:1/1+1 APS, LPT
Network-level protection (TDM)
  • SDH protection: subnet connection protection, linear multiplexing segment protection, ring multiplexing segment protection, DNI protection, E1 SNCP, shared fiber virtual path protection, multiplexing segment shared optical path protection
  • EoS protection: LCAS, LPT, STP/RSTP, MSTP, RPR protection, VP-Ring/VC-Ring protection

Device-level protection

  • Packetization: LAG
  • TDM: TPS, BPS, PPS, LAG, DLAG
  • 1+1 hot backup for crossover, clock and master units
  • 1+1 hot backup for power input unit
  • Single board +3.3V power supply 1:N protection
  • Intelligent fan
  • Single board protection method for abnormal conditions
Maintenance MPLS OAM Support CV, FFD, BDI, FDI, Ping, Traceroute
ETH OAM (Packet)
  • Ethernet service OAM: supports CC, LB, LT, LM (single-ended LM only), DM (Two-way DM only)
  • Ethernet port OAM: supports OAM auto-discovery, link performance monitoring, remote loopback, fault detection, self-loop detection
ETH OAM (TDM)
  • Ethernet service OAM: supports CC, LB, LT, OAM_Ping
  • Ethernet port OAM: supports OAM auto-discovery, link performance monitoring, far-end loopback, fault detection, self-loop detection
Synchronization Grouping
  • Physical layer clock
  • Synchronous Ethernet
  • CES ACR
TDM Physical Layer Clocking
DCN Out-of-band DCN Supports HWECC, IP over DCC, OSI over DCC
In-band DCN Supports HWECC, IP
Standard Operating Voltage
  • If the standard voltage of the input power supply is -48V, the power supply voltage is between -38.4V and -57.6V.
  • If the standard voltage of the input power supply is -60V, the power supply voltage is between -48V and -72V.
Installation Methods ETSI cabinets, 19-inch cabinets, wall mounting, desktop mounting
Equipment Operating Environment Subrack temperature
  • Long-term: 0°C to 45°C
  • Short-term: -5℃~55
Subrack Relative Humidity
  • Long term:5%~85%
  • Short-term:5%~95%
Reliability index System availability 0.999997671
MTTR (Mean Time to Repair) 1 hour
MTBF (Mean Time Between Failure of System) 49.02 years


Sales_Product Quotation_Sales Manufacturer_Product Characteristics_Product Description_Huawei SDH Transmission Equipment Sales
Supply_Troubleshooting_Installation and Testing_Technical Specifications_Technical Parameters_Huawei SDH Transmission Equipment Sales

Contact Us
Name:Mr Zhang
Phone:18529092692
Tel:18529092692
Email:info@opticaltrans.com
Address:Cuiguang 1st Distriuct Buiding 8th, Shenzhen, Guangdong Province
Contact
18529092692
Phone:18529092692
Email:info@opticaltrans.com
Address:Cuiguang 1st Distriuct Buiding 8th, Shenzhen, Guangdong Province
Follow Us
Otrans Technology is a high-tech enterprise deeply engaged in optical transmission and network communication equipment, specializing in...
Copyright © 2025 Otrans all right reserve XML 网站模板