Problem Description

Optix OSN3500 upgraded from V1R2C02B018SP01 to V1R3C02B061, after upgrading, querying with network management shows 13.61, command line query shows 13.62

Webmaster version: T2000V200R002C01B01H

Alarm message

None

Processing

Processing method 1:

Host side: the device R&D modifies the relevant configuration file of the host, which is currently not modified by the device R&D.

Processing method two:

Network management side: Upgrade the network management to V2R3 and subsequent versions. Starting from R3 network management , for dual-main-control board network elements, the version information will be queried on the network element side , and for non-dual-main-control-board network elements, this function is used directly to return from the network management side.

Because the network management has done this adaptation, there will be no problem to query the version information of the main control board on the network management.

Cause

1. The version number recorded in the host 5.**.13.62 ne.ini configuration file is 5.**.13.61, and the Qx stream will query the host's ne.ini when uploaded by the network administrator , so it shows 61.

2、Query the version information of the main control board from the network management , R2 network management does not query from the host, and the version number is obtained from the host's configuration file when the network element is created, so it is displayed on the site network management is 61.

Recommendations and Summary

This type of problem is encountered more often when Huawei OSN3500 is upgraded. If you confirm that all software and configuration files are loaded, and the network management query and the command line query are inconsistent, it is likely to be the above situation;