Description of the problem

Huawei OSN1500 device network element main control board type SSQ5CXLL410 and METRO5000 network element SLQ4 optical port docking ECC does not work, in the upper end can not monitor this OSN1500 network element, host version: 5.36.18.50P01

Processing

The Huawei OSN1500 SSQ5CXLL410 single board can realize two rate types, 155M or 622M, by replacing the 155M or 622M optical module; and this single board is the SSQ1SL1 board by default in its configuration file. When no configuration is done, it is recognized as a 155M rate, resulting in ECC not being available after interfacing with a 622M optical port.

Solution

1. Check that the optical power and fiber connection are normal.

2, the scene using the command line to log OSN1500 network element cfg-get-board query 4, 5 slots empty no logical board configuration.

3. cfg-get-phybd query shows that slots 4 and 5 show the physical board as sl1 board.

4, the implementation of cfg-add-board:4,ssq1sl4 and cfg-verify to create a logical board for SL4 and verify the upper end can be normal monitoring of this OSN1500 network elements.

Suggestions and Summary

Huawei SSQ5CXLL4 supports two rates of optical modules, but from the name of the board, we are accustomed to think that it should be 622M, so it is recommended that the R & D modify the configuration file, so that it defaults to the rate of 622M is more reasonable.

This chapter of related technical information and SDH equipment troubleshooting process is collected and organized by Shenzhen Optical Transmission Network Technology Company Limited ( www.opticaltrans.com), reproduced please retain! Our company specializes in Huawei SDH optical transmission equipment, SDH transmission equipment sales.