Chinese
English
OSN1500 SSR2EOW is a common service service processing board, and the functional version of the single board is R1. The single board is a service processing board, which is applied in the OptiX OSN system to provide the service telephone interface, transparent transmission port, or outside time interface, etc. The single board is a service processing board, which is applied in the OptiX OSN system to provide the service telephone interface, transparent transmission port, or outside time interface. The single board mainly accomplishes the extraction, insertion and processing of overhead bytes E1 and E2 and other data bytes. The single board consists of a clock module, an overhead processing module, and a power supply module. The single board can be inserted into the slot 9 of the subrack. the broadcast data port supports both RS422 and RS232 levels. Complete the processing of E1, E2, Serial 1 to Serial 4 bytes. Provides 1 official telephone interface. Dimensions: 25.4mm (W) × 235.2mm (D) × 128mm (H), the maximum power consumption of the single board at room temperature (25 ° C) under the conditions of 10W. weight: 0.4kg
OSN1500 business phone configuration parameters
This section describes the parameters that need to be set when using the business phone. The parameters related to the configuration of the business phone are described in Table 1.
|
Domain |
Value Field |
Description |
|---|---|---|
| Call Waiting Time (s) | 1 to 9 Default value: 9 |
Used to set the timeout time for the route search of the business phone. When the route search exceeds the set value, the business phone enters the busy state. You can click Call Waiting Time (s) for details. |
|
Dialing Mode |
Pulse, Dual Tone Default: Dual Tone |
Displays the dialing mode of the business phone. |
| Conference Call | 100 to 999999999 Default value: 999 |
Used to set the phone number for network-wide official conference calls. Click Conference Calls for details. |
|
Phone 1, Phone 2, Phone 3 |
100 to 999999999 | This section describes how to set the phone number for official addressable calls. Addressing calls are point-to-point calls. The overhead supports up to 3 phone numbers for business calls. Since some devices support only one official phone number, phone 2 and phone 3 are not available in this case. When the value field is empty, the down configuration does not indicate that the corresponding data on the host side will be cleared, but rather that it will not be changed. You can click "Phone" for more information. |
|
Selected Business Phone Ports |
Slot number - Board name - Port number (port name) |
Select the board port for business telephone transmission. |
| Optional official telephone port | Optional official telephone port Default: Bid-BidType-PortID |
Used to set whether this optical port is used for business telephony. You can click Alternate Business Phone Port for details. |
| Alternate Conference Phone Optical Port | Alternate Business Phone Port Default: Bid-BidType-PortID |
Used to set whether this optical port is used for conference calls. You can click Alternate Conference Phone Optical Port for details. |
| Subnet Number Length | 1, 2 Default: 1 |
When the whole network is divided into several official subnets, this parameter indicates the length of the subnet numbers of these official subnets. You can click "Subnet Number Length" for more information. |
| Subnet | 0 to 9 Default value: 0 |
Sets the subnet number of the official phone served by this optical port. Click "Subnet (Optical Port Subnet Number)" for details. |
This chapter of related technical information and SDH equipment troubleshooting procedures provided by Shenzhen Optical Transmission Network Technology Co. Huawei SDH Optical Transmission Equipment,SDH Transmission Equipment Sales
