Chinese
English
The Huawei OSN3500 SSN1ADL4 single board consists of an optoelectronic conversion module, a physical layer module, an ATM module, an E3 module, a mapping module, a logic control module, a clock module, and a power module.
Huawei OSN3500 SSN1ADL4Single Board Feature Code
The single-board characterization code is the code located after the single-board name in the single-board bar code.The single-board characterization code of ADL4 is used to describe the optical interface type.
The relationship between the ADL4's single-board characteristic code and the optical interface type is shown in Table 1.
| Single-board | Characteristic code | Optical interface type |
|---|---|---|
| SSN1ADL410 | 10 | S-4.1 |
| SSN1ADL411 | 11 | L-4.1 |
| SSN1ADL412 | 12 | L-4.2 |
| SSN1ADL413 | 13 | Ve-4.2 |
Huawei OSN3500 SSN1ADL4Technical Specifications
The ADL4 single-board metrics contain optical interface metrics, laser safety level, mechanical metrics, and power consumption.
Huawei OSN3500 SSN1ADL4 optical interface indicators
The optical interface metrics of the ADL4 single board are shown in Table 1.
| Item | Indicator value | |||
|---|---|---|---|---|
| Optical interface type | S-4.1 | L-4.1 | L-4.2 | Ve-4.2 |
| Operating wavelength range (nm) | 1274～1356 | 1280～1335 | 1480～1580 | 1480～1580 |
| Fiber Type | Single-mode LC | Singlemode LC | Singlemode LC | Single-mode LC |
| Transmit optical power range (dBm) | -15 to 8 | -3 to 2 | -3 to 2 | -3 to 2 |
| Optical receive sensitivity (dBm) | -28 | -28 | -28 -28 | -34 |
| Minimum overload point (dBm) | -8 | -8 | -8 -8 | -13 |
| Minimum extinction ratio (dB) | 8.2 | 10 | 10 | 10.5 |
| Maximum -20dB spectral width (nm) | - | 1 | 1 | 1 |
| Minimum Side Mode Rejection Ratio (dB) | -Minimum Side Mode Rejection Ratio (dB) | 30 | 30 | 30 |
Laser Safety Class
The single-board laser safety level is CLASS 1. The maximum output optical power of the single-board optical port is less than 10 dBm (10 mW).
Huawei OSN3500 SSN1ADL4 Mechanical Specifications
The mechanical specifications of the ADL4 veneer are as follows:
- Veneer size: 25.4mm (W) × 235.2mm (D) × 261.4mm (H)
- Weight: 0.9kg
Power consumption
The maximum power consumption of the ADL4 veneer is 41W at room temperature (25°C).
