Protection requirements

18529092692

  • SSN4EGS4.png
  • SSN4EGS4.png
OSN3500 SSN4EGS4 Quad Switched Gigabit Ethernet Processing Board
  • OSN3500 SSN4EGS4 Quad Switched Gigabit Ethernet Processing Board This type of board is available in three functional versions, N1, N3, and N4.The SSN4EGS4 board supports Layer 2 switching, link aggregation, multicast, and other functions and features.


Consultation hotline:
18529092692
Product Introduction

Products

Huawei SDH Optical Switch OSN1500 SSN4EGS4 Technical Parameters

Optix OSN3500 SSN4EGS4/SSN1EGS4 Ethernet Single Board Price and Appearance

华为OSN3500 SSN4EGS4价格

Optix OSN3500 SSN4EGS4 Single Board Characteristic Code
Table 1 Relationship between OSN3500 EGS4 Single Board Characteristic Code and Interface Type

Optix OSN3500 SSN4EGS4/SSN1EGS4 Ethernet Single Board Functions and Features

The Huawei SSN4EGS4 single board supports Layer 2 switching, link aggregation, multicast, and other functions and features.

The specific functions and features of the SSN4EGS4 single board are shown in Table 1.

Table 1 EGS4 single-board features and characteristics

Functions and FeaturesDescription
Basic FunctionsProcesses 4-channel GE services.
Interface Type
  • Support 1000BASE-SX/LX/ZX/VX Ethernet optical interface, support self-negotiation function, meet IEEE 802.3z standard. Adopting pluggable SFP optical interface, the transmission distance of multi-mode fiber can reach up to 550m, and single-mode fiber up to 10km (40km and 80km optical modules can also be selected according to the actual needs).

  • The N1EGS4 and N4EGS4 boards also support 1000BASE-T Ethernet electrical interfaces, which support self-negotiation, of which the N1EGS4 supports 1000M self-negotiation rate and the N4EGS4 supports 10M, 100M or 1000M self-negotiation rate. Adopting pluggable SFP electrical interface, the transmission distance can reach up to 100m.

with cable outlet panelAdopts panel direct wire out.
Interface CharacteristicsWorking Mode

GE electrical interface (N1EGS4): supports self-negotiation, 1000M full duplex.

GE electrical interface (N4EGS4): supports self-negotiation, 1000M full-duplex, 100M full-duplex, 10M full-duplex.

GE optical port: supports self-negotiation, 1000M full duplex.

Description:

Only N1EGS4 and N4EGS4 support GE electrical port.

Port flow control methodSelf-negotiationSupported
Non-self-negotiationSupported
Port Status Query/ConfigurationSupported
Interface Type QuerySupport
Optical Power Threshold SettingNot supported
Pluggable Optical ModuleSupport SFP pluggable optical module
Service TypeEPLSupports PORT-based transparent transport.
EVPL
  • Supports EVPL service with shared PORT.

  • Supports EVPL service with shared VCTRUNK.

    • VLAN tag isolation based

    • Isolated based on QinQ tag

  • Supports up to 8000 LINK services.

EPLAN
  • Maximum support for 512 blacklists and 512 static MAC addresses. Blacklist only supports destination MAC address checksum, not source MAC address checksum.

  • Support source MAC address self-learning function, MAC address table size is 128k, support MAC address aging time setting and query.

  • Supports static MAC routing configuration.

  • Supports dynamic MAC address query.

  • The maximum number of VBs supported by N1EGS4/N3EGS4 is 2, and the maximum number of logical ports per VB is 68.

  • The maximum number of VBs supported by N4EGS4 is 16, and the maximum number of logical ports per VB is 68.

  • Supports querying the actual learned MAC address by VB+VLAN or VB+LP.

  • Supports EPLAN service based on IEEE 802.1d MAC bridge.

Description:

EGS4 supports SVL and IVL bridge learning modes. the learning modes of all bridges on a single board must be the same.

EVPLAN
  • Supports data isolation based on VB+VLAN method.

  • The maximum number of VBs supported by N1EGS4/N3EGS4 is 2, and the maximum number of logical ports per VB is 68.

  • The maximum number of VBs supported by N4EGS4 is 16, and the maximum number of logical ports per VB is 68.

  • Supports setting up to 4000 VLAN services.

  • Supports EVPLAN services based on IEEE 802.1q Virtual Bridge and IEEE 802.1ad Provider Bridge.

Description:

The EGS4 supports SVL and IVL bridge learning modes, and the learning modes of all bridges on a single board must be the same.

Service SpecificationsEthernet Data Frame FormatIEEE 802.3Supported
Ethernet IISupported
IEEE 802.1 q/pSupported
Frame Length Range

N1EGS4/N3EGS4: Supports 1518Byte to 9216Byte message length setting, supports Jumbo frames up to 9216Byte.

N4EGS4: Supports 1518Byte~9600Byte message length setting, supports Jumbo frames up to 9600 Byte.

Mapping MethodVC-12, VC-3, VC-4, VC-12-Xv (X≤64 (N1EGS4/N3EGS4)), VC-12-Xv (X≤63 (N4EGS4)), VC-3-Xv (X≤24), VC-4-Xv (X≤8)
Package formatHDLCSupport
LAPSSupported
GFP-FSupport
MPLS TechnologyNot Supported
VLAN TechnologySupports 4094 VLAN tags, VLAN technology meets IEEE 802.1q/p standard.
Maximum uplink bandwidth2.5Gbit/s
Maximum Binding Bandwidth
  • N1EGS4: 16xVC-4 or 48xVC-3 or 1008xVC-12

  • N3EGS4/N4EGS4: 16xVC-4 or 48xVC-3 or 504xVC-12

VCTRUNK Specifications

Quantity: 64

Configuration Features:

  • After each level of VC channel is used by one VCTRUNK binding, other VCTRUNKs can no longer be used.

  • The same VCTRUNK can only bind one level of channel, you can't bind both VC-12 channel and VC-3 channel.

  • The 1st to 4th and 9th to 12th VC-4s of N3EGS4/N4EGS4 can be bound as VC-12/VC-3/VC-4 channels, and other VC-4s can be bound as VC-3/VC-4 channels.

  • The 1st to 8th VC-4 and 9th to 16th VC-4 of N3EGS4/N4EGS4 are divided into two zones, and VC-3/VC-4 cannot be bound across zones.

  • The 1st to 4th VC-4 and 9th to 12th VC-4 of N3EGS4/N4EGS4 are divided into two zones, and VC-12 cannot be bound across zones.

  • N1EGS4/N3EGS4 can bind up to 8 VC-4 or 24 VC-3 or 64 VC-12 per VCTRUNK.

  • N4EGS4 can bind up to 8 VC-4s or 24 VC-3s or 63 VC-12s per VCTRUNK.

Protection MethodsTPSNot supported
BPSSupported
PPSSupport

Description:

PPS creation is not supported when the single board interface type is GE electrical interface.

DLAGSupports the creation of a PPS when the single board interface type is a GE electrical interface.
LAG

Supports manual link aggregation and static link aggregation.

Supports load sharing and non-load sharing.

Meets IEEE 802.3ad and IEEE 802.1AX standards.

LCASSupport, can realize dynamic increase, dynamic decrease and protection function of bandwidth, meet ITU-T G.7042 standard.
LPTSupports point-to-point LPT and point-to-multipoint LPT, meeting Huawei's internal protocol standards.
STP/RSTP

Supports Rapid Spanning Tree Protocol, meeting the IEEE 802.1w standard.

MSTPN1EGS4 supports
SynchronizationSynchronous EthernetNot Supported
1588v2Not supported
Maintenance FeaturesETH OAM
  • N1EGS4/N3EGS4 supports CC, LB and meets IEEE 802.1ag standard.

  • N4EGS4 supports CC, LB, and LT to meet the IEEE 802.1ag standard; it supports OAM_Ping to meet Huawei's internal protocol standard.

  • Supports OAM auto-discovery, far-end loopback (N1EGS4/N3EGS4 only supports initiating far-end loopback), fault detection, and link performance monitoring to meet the IEEE 802.3ah standard; supports self-loop detection to meet Huawei's internal protocol standard.

Test FramesSupports test frames under GFP bearer mode.
Response Ping Function

Not supported

Port MirroringN4EGS4 supports mirroring of incoming ports.
Loopback CapabilityEthernet port PHY layerSupports inner loopback
Ethernet port MAC layerNot supported
VC-4 levelNot supported
VC-3 LevelNot Supported
VC-12 levelNot supported
RMONSupports RMON for Ethernet performance monitoring of Ethernet ports and VCTRUNK ports.
Soft ResetSupports soft reset, soft reset does not affect the service.
Hard ResetSupports
Alarm and PerformanceProvides rich alarms and performance events for easy device management and maintenance.
QoS
  • Supports CAR with a granularity of 64kbit/s. N1EGS4 supports 512 rate modes, N3EGS4 and N4EGS4 support 60 rate modes.

  • Supports flow classification based on PORT, PORT+VLAN and PORT+SVLAN.

IGMP SnoopingProtocol EnableSupports
Port Aging TimeSupport for
Fast Leave

N4EGS4 Support

Unknown Multicast Message Discard

N4EGS4 supports

Static multicast table entriesNot supported
Hub/SpokeSupported
Traffic ControlPort-based IEEE 802.3x control is supported.

Description:

Only EPL services support port-based flow control.

Traffic Monitoring

N4EGS4 supports port and VCTRUNK based traffic monitoring.

The single-board characterization code is the code in the single-board barcode that follows the single-board name.The EGS4's single-board characterization code is used to describe the single-board interface type.

The relationship between the SSN4EGS4's single-board characterization code and the interface type is shown in Table 1.

Single-boardCharacteristic CodeInterface type
ssn1egs410, ssn3egs410, ssn4egs410101000BASE-SX (0.5km)
ssn1egs411, ssn3egs411, ssn4egs411111000BASE-LX (10km)
ssn1egs412, ssn3egs412, ssn4egs412121000BASE-VX (40km)
ssn1egs413, ssn3egs413, ssn4egs413131000BASE-ZX (80km)
ssn1egs414, ssn4egs414141000BASE-T (100m)



Huawei SSN4EGS411 Purchase Price_Product Description_Hardware Description_Technical Parameters_Product Characteristics-Huawei SDH Transmission Equipment Sales

Supply Optix OSN3500 SSN4EGS411 Quote_Agent Price_Sales Manufacturer_Product Supplier-Huawei SDH Transmission Equipment Sales

Online Ordering
Contact Us
Name:Mr Zhang
Phone:18529092692
Tel:18529092692
Email:info@opticaltrans.com
Address:Cuiguang 1st Distriuct Buiding 8th, Shenzhen, Guangdong Province
Contact
18529092692
Phone:18529092692
Email:info@opticaltrans.com
Address:Cuiguang 1st Distriuct Buiding 8th, Shenzhen, Guangdong Province
Follow Us
Otrans Technology is a high-tech enterprise deeply engaged in optical transmission and network communication equipment, specializing in...
Copyright © 2025 Otrans all right reserve XML