Protection requirements

18529092692

  • SSN1PEX2.png
  • SSN1PEX2.png
OSN3500 SSN1PEX2 Processing board for 2-channel 10GE Ethernet services
  • PEX2 single board supports 2-channel 10GE Ethernet service processing and forwarding, supports QoS functions such as traffic statistics, congestion control and queue scheduling for packets, and supports 10GBase-LR (LAN), 10GBase-ER (LAN) and 10GBase-ZR (LAN) Ethernet optical interfaces.


Consultation hotline:
18529092692
Product Introduction

Products

Huawei SDH Optical Transceiver OSN3500 SSN1PEX2 Technical Parameters Introduction

OSN3500 SSN1PEX2外观

The PEX2 single board supports the processing and forwarding of 2-channel 10GE Ethernet services, and supports QoS functions such as traffic statistics, congestion control, and queue scheduling for packets.

The specific functions and features of the PEX2 single board are shown in Table 1.

Table 1 Functional characteristics of the PEX2 single board

Functions and FeaturesDescription
Basic FunctionsAccess and process 2-channel 10GE services.
Interface Type
  • Support 10GBase-LR(LAN), 10GBase-ER(LAN) and 10GBase-ZR(LAN) Ethernet optical interfaces, the optical interface adopts LC connector and supports 10km, 40km and 80km transmission distance.

  • Supports CWDM and DWDM color optical interfaces, the optical interface adopts LC connector, the CWDM optical interface supports 70km transmission distance, the DWDM optical interface supports 40km and 80km transmission distance.

Match with Outlet BoardDoes not support the outlet board, 2 10GE interfaces directly from the single board panel.
Interface CharacteristicsPluggable Optical ModuleSupport XFP pluggable optical module
Single-fiber bi-directional optical moduleNot Supported
Operating ModeSupports 10GE full duplex LAN.
Port Flow ControlSelf-negotiation: Not supported
Non-self-negotiation: Supported
Port Status Query/SettingSupport
Interface type querySupport
Optical power threshold query/settingSupport
Unidirectional mode query/settingSupport
Service SpecificationsProcessing capacityFull duplex 20Gbit/s
Service Bearer ModeMPLS: Support
QinQ: Support
Port: Support
PW SpecificationsNumber of PWs: 16K
Number of MS-PWs: 8K
Tunnel SpecificationsNumber of unidirectional Tunnel (shared between unidirectional and bidirectional MPLS Tunnel)
  • With N4GSCC: 4K

  • With N6GSCC: 16K

Number of Bidirectional Tunnel (shared between unidirectional and bidirectional MPLS Tunnel):
  • With N4GSCC: 2K

  • With N6GSCC: 8K

Port MFLSupports 960Byte to 9600Byte message length setting, after the setting takes effect, the maximum length of the message in the inbound port direction and the outbound port direction are limited by the MFL setting.
Service MTUFor packet services carried by PW, the message length setting of 64Byte to 9600Byte is supported. For packet services under other bearer methods, the message length setting is not supported.
Ethernet Service Specifications

E-Line: Support

Number of services that can be processed:

  • With N4GSCC: 4K

  • With N6GSCC: 8K

E-LAN: Support

Number of processable services: 1020.

Number of static MAC addresses for E-LAN services: 2K.

E-Aggr: Not supported
Ethernet Data Frame FormatIEEE 802.3, Ethernet II, IEEE 802.1q/p frame format encapsulation.
Number of QinQ Link1K
Jumbo FrameSupports Jumbo frames up to 9600 Bytes.
Protection MethodTunnel APS

Supports 1+1 (single-ended/dual-ended) and 1:1 (dual-ended), meeting ITU-T Y.1720 and ITU-T G.8131 standards.

Number of APS: 1K.

PW APS

Supports 1+1 (single-ended/double-ended), 1:1 (double-ended) and PW FPS (single-ended), meeting ITU-T Y.1720 and ITU-T G.8131 standards.

Number of APS: 1K.

Number of PW protection binding members: 512.

Description:

PW APS and Tunnel APS adopt protection resource sharing.

MRPS

supports MRPS (MPLS-TP Ring Protection Switching):

  • Protection group type: 2-fiber bidirectional

  • Switching mode: Wrapping switching

LAG
  • Supports manual link aggregation and static link aggregation.

  • Supports load sharing and non-load sharing.

  • Meets IEEE 802.3ad and IEEE 802.1AX standards.

MC-LAGSupported, meets IEEE 802.3ad and IEEE 802.1AX standards.
MSTPSupported to meet IEEE 802.1s standards.
LPTPoint-to-point LPT: Supported
Point-to-Multipoint LPT: Supported
SynchronizationSynchronized Ethernet ClockSupports 2-way synchronized Ethernet clock function.
1588v2Supports 2-way 1588v2 time and clock functions.
Maintenance FeaturesETH OAM

Ethernet service OAMa:

Supports CC, LB, LT and meets IEEE 802.1ag standard.

Support LM, 2DM, meet ITU-T Y.1731 standard.

Number of OAMs: 2K.

Ethernet port OAMa:

Support OAM auto-discovery, link performance monitoring, meet IEEE 802.3ah standard.

Number of OAMs: 2K.

Distributed MPLS OAM/Centralized MPLS OAM

MPLS Tunnel OAMa:

Support CV, FFD, BDI, FDI, Tunnel Ping, Tunnel Traceroute, meet ITU-T Y.1711 standard.

Number of OAMs: 2K.

MPLS PW OAMa:

Support CV, FFD, BDI, FDI, PW ping, PW Traceroute, meet ITU-T Y.1711 standard.

Number of OAMs: 2K.

MPLS-TP OAM

MPLS-TP Tunnel OAMa:

CC, RDI, AIS, LB, LT, LM, 2DM, 1DM, TST, LCK supported, meets ITU-T G.8113.1 standard.

Number of OAMs: 2K.

MPLS-TP PW OAMa:

CC, RDI, AIS, LB, LT, LM, 2DM, 1DM, TST, LCK, CSF supported, meets ITU-T G.8113.1 standard.

Number of OAM: 2K.

Loopback CapabilityEthernet port PHY layer: not supported
Ethernet port MAC layer: inner/outer loopback supported
RMONSupport
Port MirroringSupported
In-band DCNSupport
HQoS

Supports service WRED policy, WFQ policy, PW policy, QinQ policy, V-UNI Ingress policy, V-UNI Egress policy, Port policy, Port Shaping.

IGMP SnoopingProtocol EnablementSupport
Port Aging TimeSupport
Fast LeaveSupport for
Unknown Multicast Message DiscardSupport for
Static Multicast Table EntriesSupport for
Tag LookupSupport for

OSN3500 SSN1PEX2 Alarm Indicators

  • Single board hardware status indicator (STAT) - red and green dual-color indicators

  • Service activation indicator (ACT) - green light

  • Single-board software status LED (PROG) - red and green dual-color LEDs

  • Service warning indicator (SRV) - red, green, yellow color indicator

  • Data connection status LED (LINK) - green light

  • Data Transmission and Receipt LED (ACT) - Orange LED

See the description of the single-board alarm indicators for the specific meanings of the indicators.

OSN3500 SSN1PEX2 Interface

There are 2 pairs of optical interfaces on the panel of the PEX2 single board, and the types and uses of the optical interfaces are shown in Table 1.

Table 1 PEX2 single board interface description

Panel InterfaceInterface TypePurpose
IN1 to IN2LC (pluggable)Receives 10GE signals.
OUT1 to OUT2LC (pluggable)Send 10GE signals.



Huawei SSN1PEX2 Purchase Price_Product Description_Hardware Description_Technical Parameters_Product Features-Huawei SDH Transmission Equipment Sales

Supply Optix OSN3500 SSN1PEX2 Quote_Agent Price_Sales Manufacturer_Product Supplier-Huawei SDH transmission equipment sales

Online Ordering
Contact Us
Name:Mr Zhang
Phone:18529092692
Tel:18529092692
Email:info@opticaltrans.com
Address:Cuiguang 1st Distriuct Buiding 8th, Shenzhen, Guangdong Province
Contact
18529092692
Phone:18529092692
Email:info@opticaltrans.com
Address:Cuiguang 1st Distriuct Buiding 8th, Shenzhen, Guangdong Province
Follow Us
Otrans Technology is a high-tech enterprise deeply engaged in optical transmission and network communication equipment, specializing in...
Copyright © 2025 Otrans all right reserve XML