Chinese
English
OptiX OSN3500 Ethernet Interface Operating Modes
Impact on the system
If the operating modes of the docked Ethernet ports are inconsistent, the service will not be available or severe packet loss will occur.
Parameter Value
|
Value range |
Default Value |
|---|---|
|
10M half-duplex, 10M full-duplex, self-negotiation, 100M half-duplex, 100M full-duplex, 1000M full-duplex, 10G full-duplex LAN, 10G full-duplex WAN |
The meaning of each parameter value is as follows.
|
Parameter Options |
Description |
|---|---|
|
10M half-duplex |
The maximum transmission rate of this port is 10Mbit/s, and the communication mode is half-duplex. |
|
10M full duplex |
The maximum transmission rate of this port is 100Mbit/s, and the communication mode is full duplex. |
|
Self-negotiation |
If the working mode of this port is self-negotiation, the port can automatically find out the optimal working mode matching with the docking port through the protocol for communication. |
|
100M half-duplex |
The maximum transmission rate of this port is 100Mbit/s, and the communication mode is half-duplex. |
|
100M full duplex |
The maximum transmission rate of this port is 100Mbit/s, and the communication mode is full duplex. |
|
1000M full duplex |
The maximum transmission rate of this port is 1000Mbit/s, and the communication mode is full duplex. |
|
10G full-duplex LAN |
The maximum transmission rate of this port is 10Gbit/s, and the communication mode is full duplex. The interface type is 10G Base-SR/LR/ER/ZR, which is connected to the internal device port, usually supports DHCP server, and is applicable to the Ethernet port. |
|
10G Full-Duplex WAN |
The maximum transmission rate of this port is 10Gbit/s, the communication mode is full duplex, the interface type is 10G Base-SW/LW/EW/ZW, it connects with the WAN access device, usually supports DHCP client, and applies to SDH ports. |
Principle of value
Self-negotiation working mode is recommended. If communication fails when the self-negotiation mode is set, you need to specify the port's operating mode according to the operating mode of the docking device.
In the absence of any other working mode set to self-negotiation, the working modes of the two ends of the docking station are required to be identical, otherwise communication is not possible.
When docking with other devices, it is recommended to directly set the working modes of both ends to full duplex.
The technical information in this chapter and related SDH equipment troubleshooting procedures are provided by Shenzhen Optical Transmission Network Technology Co. Huawei SDH optical transmission equipment, SDH transmission equipment sales phone: 13430988088 Welcome to call!
