Chinese
English
OptiX OSN3500 Ethernet Interface Package Type
Parameter Value
|
Value range |
Default value |
|---|---|
The meaning of each parameter value is as follows.
|
Parameter Options |
Description |
|---|---|
|
Null |
No link layer encapsulation or does not handle link layer encapsulation. |
|
802.1Q |
The default encapsulation type for Ethernet ports in Layer 2 mode is 802.1Q. |
|
QinQ |
When an Ethernet port is used for QinQ Link, you need to set the port attributes to Layer 2 mode, the encapsulation type is QinQ, and the "QinQ Type Field" of both Ethernet ports should be set to the same value. |
Principle
The encapsulation type of a port is currently supported only for Ethernet ports and can be switched only if the port is not carrying services.
The encapsulation type of an Ethernet port in Layer 2 mode can be Null, 802.1Q, or QinQ, and the encapsulation type in Layer 3 mode is fixed to 802.1Q and cannot be set.
The technical information in this chapter and the related SDH equipment troubleshooting procedures are provided by Shenzhen Optical Transmission Network Technology Co. Huawei SDH optical transmission equipment, SDH transmission equipment sales phone: 13430988088 Welcome to call!
